USB To TTL Converter Multi-Functional Portable CH343G USBto Serial Mod

Detailed Information About The Product:

Full-speed USB device interface compatible with USBV2.0. Built-in firmware emulates standard serial ports and is used to upgrade serial port peripherals or add additional serial ports via USB. the serial port application program under the Windows operating system on the computer side is fully compatible and does not need to be modified.
Supports installation-free operating system built-in CDC class driver or multi-functional high-speed VCP manufacturer driver. Hardware full-duplex serial port built-in independent transceiver buffer supports communication baud rate 50bps ~ 6Mbps. Optional automatic identification and dynamic adaptation of common communication baud rates at 115200bps and below.
The serial port supports 5 6 7 or 8 data bits and supports odd parity even parity blank flag and no parity. Supports commonly used MODEM contact signals RTS DTR DCD RI DSR CTS. Support CTS and RTS hardware automatic flow control.
Support half-duplex provide sending status TNOW and support RS485 switching. By adding an external level conversion device the RS232 interface is supported. the USB side supports 5V power supply voltage and 3.3V power supply voltage.
The serial port I/O is independently powered and supports 5V 3.3V 2.5V and 1.8V power supply voltages. Built-in power-on reset built-in clock no external crystal oscillator required. the chip has built-in Unique ID USB Serial Number. Available in SOP16 ESSOP10 and QFN16 lead-free packages RoHS compliant.

Description:
Instructions for use
The 5V and 3.3V outputs can be switched via jumpers. Note: Direct connection of 3.3V and 5V will burn the board confirm the level before connecting
1. If the jumper is between VDD and +5V the high level of TXD and RXD output is 5V.
2. If the jumper is between VDD and 3V3 the high level of TXD and RXD output is 3.3V.
Different batches may have differences in product appearance color and printing which do not affect use
size: 40mm x 19mm
Material: PCB
colour: as described

Package Contents:
5 x CH343G USB to Serial Port Module
5 x 4Pin Bent Pin
5 x 3Pin Bent Pin and Jumper Cap

Only the above package content other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best pricewe support Wholesale/Drop Shipping Order
1. For Drop Shipping order please remark"dropshipping order" we will prioritize it.
2. For Wholesale/Drop Shipping orders if you have any ideas about the price or packageplease contact us in advancewe will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the orderplease contact us in advance we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your packageplease don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !