Voltage Capability IGBT Transistor Tester MOS Triode Diode LED Voltag

Detailed Information About The Product:

1. The output voltage is DC 110~2600V. You can turn the voltage adjustment on clockwise to make the voltage larger and turn it counterclockwise to make the voltage smaller.
2. The output current is 0.25~3.4mAh. You can turn the voltage adjustment on clockwise to make the current larger and turn it counterclockwise to make the current smaller.
3. When testing MOS tubes transistors and Zener diodes it is recommended to adjust the current to the minimum scale of 0.25mA. When testing LED backlight panels it is recommended to adjust the current to the maximum scale of 3.4mAh.
4. Portable size: The small size of this tool is very convenient for daily use. You can carry it in a tool bag without taking up too much storage space.
5. Built-in 600 mAh large-capacity lithium battery for power supply which can be charged in time through the Type-C interface. 6. Wide application: This tool can be widely used for maximum voltage capacity testing of MOS transistors IGBTs diodes Zener diodes diode bridges voltage verification of capacitors and varistors LED backlight and light panel testing etc.

Product parameters:
Battery capacity: 3.7V 600mAH
Charging port: TYPE-C
Input: 5V 1A
Charging current: Max.550mA
Output voltage: 120-2700V
Output current: 0.2-3.8mA
Applicable components: MOS tube/IGBT/transistor/diode/electrolytic capacitor/LED/MOV/unidirectional thyristor/rectifier bridge
Test target: breakdown voltage value of electronic components
Notice:
1. Do not use it to test high-voltage large electrolytic capacitors such as 450V/220UF. It is possible to test low voltage capacitors such as 2200UF/35V.
2. If there is no output voltage when pressing the red high-voltage start on it is likely that the lithium battery voltage is lower than 3.1V which cannot power the tester and needs to be charged in time.
3. Only when testing LEDs and Zener diodes the output current can be adjusted to the maximum value. For testing other components the output current can be adjusted to the minimum value to avoid damaging the components.
Different batches may result in different product appearances printed text and colors which do not affect usage.
font color:B: blue
Colour: White
Material:plastic

Package Contents:
1 x Tester

Only the above package content other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best pricewe support Wholesale/Drop Shipping Order
1. For Drop Shipping order please remark"dropshipping order" we will prioritize it.
2. For Wholesale/Drop Shipping orders if you have any ideas about the price or packageplease contact us in advancewe will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the orderplease contact us in advance we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your packageplease don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !