IDE To SATA Adapter 40Pin IDE To SATA Converter 3.5in HDD I

Feature:
1. Suitability: Suitable for desktop and 3.5in hard drives, suitable for all IDE 40Pin drives, up to 1000GB.
2. Function: The adapter is suitable for upgrading an old computer with a 3.5in IDE HDD to a new 3.5in SATA HDD or SSD.
3. Support: 3.5in IDE PATA 40Pin HDD to SATA Female Converter Adapter PCBA, Support IDE 66 100 133MB/s.
4. Plug and Play: No driver required, plug and play, the unit is not hot swappable.
5. Compatible Systems: Compatible with for DOS, for Windows 98 98SE, Me, 2000, 2003, XP, Vista, for Windows 7 and for Linux systems.

Specification:
Item Type: IDE to SATA Adapter
Product Material: PCB
Scope Of Application: Suitable For IDE Optical Drive, Recorder, 3.5in Hard Disk, Video Recorder Hard Disk
Compatible with all brands of desktop computers:
Support: Video recorder IDE hard disk to SATA, connected to the motherboard SATA port for use
Support: 3.5in DE hard drive to SATA, connected to the motherboard SATA port for use
Support: IDE optical drive to SATA, connect to the motherboard SATA port for use
Support: IDE burner to SATA, connect to motherboard SATA port for use
Function: The desktop 3.5in IDE hard disk can be transferred to the SATA video recorder for use (please format the hard disk on the computer first)
Function: The transferred hard disk can be used as master disk and slave disk (requires reinstalling the system, refreshing in BIOSS, etc.)
Function: The converted optical drive can be booted as a system
Supported capacity: The riser card supports parallel hard disks with a maximum capacity of 1000G
Function: For IDE devices using a riser card, the jumper hat must be inserted in the position of MASTER
Compatibility: Compatible with SATA 1.0, SATA 2.0 (not compatible with SATA 3.0).

Package List:
1 x IDE to SATA Adapter1 x Power Cord
Note:
The product cannot be used Common faults:1. Check if there is a problem with the SATA data cable and see if it is loose. Or use a normal SATA cable.2. Check whether the jumper is connected to the main disk, and the value is in the MASTSER position.3. Check whether the settings in the boot BIOS are correct. Some motherboards require BIOS settings (set SATA mode to IDE MODE)4. If it still cannot be used, it may be a compatibility problem. There are a small number of devices with this type of conversion card that have compatibility problems.5. Compatibility is not recognized due to product reasons. It will be fixed later, and I will share it below. When it is not recognized: Right click "My Computer, Properties", "Hardware", "Device Manager". Then open "IDE ATA PATA Controller" and then double click the primary and secondary IDE channels respectively, select "Advanced" "Settings", set "Device Type" to "Auto Detect", set "Transfer Mode" to "DMA (if available)", click to confirm. After restarting, see if the system finds new hardware.6. This model does not support the motherboard IDE interface to SATA hard disk, etc., please pay attention to the purchase.Special Note: Comes with 4PIN power cable, without SATA cable