M.2 WiFi A&E Key A+E NGFF To PCI-E 4.0 X1 Riser Extender Adapter Gen4 Ribbon Extension Cord For M2 Wireless Network Riser Cards

ADT Factory direct sales, excellent product performance, super good reputation products, 100% fully inspected and energized tested before shipped


ADT-Link PCIe 4.0 x1 to M.2 WiFi Extension CableBrand name: ADT-LINKProduct name:M.2 WiFi ( A.E Key ) wireless network card to PCI-E X1 signal cableProduct model:R15JF 4.0Transfer speed:PCIe 3.0/4.0Wire length:3 ~ 100 cm, the length can be customizedApplication: PCIe x1 Add_On_Card to M.2 WiFi slot extension cable

Product function: industrial control server equipment connection, PCIe signal high-speed transmission


PCIe 4.0 Advantages:

Bandwidth speed (Max.):
PCIe 4.0x1 ; 16G/bps

SMB_BUS signal direct connection: ?supportWAKE#Signal direct connection: supportCLKREQ# signal direct connection: supportDifferential signal metal shield:support


Cable length Description:The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector's length. For the wire length, please refer to the 5cm blue arrow in the figure below.Is there any EMI shielding?for Cable?The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.
?

Product advantages:

?

1. Wire advantage, use German patented imported wire, use Taiwan imported connector, support PCIe 3.0/4.0 full-speed stable transfer

?

2. Cord length advantage, from 3 cm to 1 meter can be customized

?

3. Differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit phenomenon, and the product is durable

?

4. The product is made of high-quality materials, the PCB is made of precision, the thickness of the copper material is thickened to 1oz, the gold plated content of the gold finger is sufficient, and the gold plated foot has good electrical conductivity, which can reduce the blue screen of crash caused by the increase of oxidation and rust resistance.

?

5. The wire used in the product is very durable. Use PCB gaskets with a thickness of 3mm to protect the metal welding points, and lock the screws and hexagonal nuts to fasten the product. The product is strong and reliable, resistant to pulling, anti-interference, and will not break The nail drop problem. The wire can be bent or folded without affecting the use.

?

6. The PCB design is short and fattening, so that it will not get stuck on the graphics card. The fat and long design makes the board easier to install and reduces the chance of damage.
Precautions for purchase:1. Be sure to recognize the direction when plugging in, do not plug it in reverse or off-position to prevent burning of the device. When plugging in, first hold the socket of the device before plugging in to avoid inserting the socket pins with excessive force. It is forbidden to bend or pull within 2cm of the welding place between the two ends of the wire and the circuit board.2. The board or motherboard is an electronic device that will age and oxidize with time, and then connecting an extension cord will only make it more unstable. Old devices are not supported. Over 3 years. Please do not buy.3. Limited to product engineers designated to purchase, only for product testing use, other purposes, please do not buy4. Only supports the universal version of M.2 WiFi wireless network card, does not support USB Bluetooth, does not support mSATA does not support Lenovo/HP network card, please do not buy

window.adminAccountId=240503947;