Tecno Spark 10 Pro ,6.8'' (8GB RAM/256GB ROM) Android 13//BL

 Spark 10 Pro houses a 6.8-inch IPS LCD display that offers an FHD+ resolution of 2460 x 1080 pixels, a 20.5:9 aspect ratio, a 90Hz refresh rate, and a DCI-P3 color gamut. The device comes preloaded with Android 13 OS and HiOS 12.6.

On the front, it has a 32-megapixel camera with an LED flash. On the back, it has a 50-megapixel primary camera, an AI lens, and a quad-LED flash.

Under the hood, the Spark 10 Pro features the Helio G88 chipset, 8 GB of RAM, 8 GB of virtual RAM, and a 5,000mAh battery with 18W charging via USB-C. The power button located on its right edge is integrated with a fingerprint sensor. It offers other features, such as up to 256 GB of storage, dual 4G VoLTE, Wi-Fi, Bluetooth, NFC, and a 3.5mm audio jack.

The Spark 10 Pro has a glass back and measures 168.41 x 76.21 x 8.46mm. It comes in two color options: Starry Black and Pearl White. The handset is expected to arrive in two variants, such as 8 GB RAM + 128 GB storage and 8 GB RAM + 256 GB storage.

The design of SPARK 10 Pro is somewhat similar to its predecessor, but not quite. The most obvious change is the camera module, two circles have become three. But when you look closer, the lens has become one less. The circle on the right is actually the flash, and the small hole above it is just a decoration. Although there is one less lens, that lens is really not very important. I think it’s worth it if you can get a better main camera.
The back panel design is also made up of glossy and frosted, but the glossy area has been cut down, and only the lens module part is glossy. This time the back panel material has been upgraded, and the new Starry glass is more scratch resistant and very smooth to the touch. Unfortunately, there are only two colorways of black and white this time, green and blue do not appear on the 10 Pro.