tenda 4G LTE 35dBi High Gain Mobile Amplifier Wifi Repeater Network Expander SMA Connector White,black

Signalrepeater installationdiagram:

How to install repeater (very easy and simple):

Step 1: Use your mobile phone to signal strength outside house or on roof, -70dbm is the basic requirement (full bar).

Step 2: Install outdoor in that location and keep adjusting, point it to signal tower station, try to get the best signal.

Step 3:Run outdoor coaxial cable into building in a convenient location to connect with signal repeater.

step 4:Mount your indoor with signal repeater

step 5: up signal repeater device to check the signal inside, moving outdoor until you get a satisfied signal.

Note:

Its a 3G/4G ,use for receive 3G/4G signal Indoor .( has function when your location has 4G/4G signal Indoor)

Be sure to check specifications, compatibility and connnector before ordering.

Signal problem installation technique :

1.If signal still weak after installation, please check if outdoor point to signal tower correctly or elsewhere has stronger

signal and confirm signal strength achieve-70DBM.

2.If still have no signal after installation, please check our device adapter whether connected perfectly.And connectors

works well.

3. If strength is not steady, please check if outdoor and indoor is too close; please ensure outdoor has distance

of10 meters at least, with a barrier and not in a same horizontal line.

4. Packed the outdoor connector by waterproof , otherwise the wet will reduce the signal cover area.