TP Link Extend Your Wi-Fi Signal RE-200 750Mbps Wi-Fi Range Extender

Installation steps below

Ready to take your internet experience to the next level? Introducing the TP-Link RE-200 AC750 Wi-Fi Range Extender – the ultimate solution for strong and reliable Wi-Fi coverage in every corner of your home or office.

Say goodbye to buffering and dead zones and hello to lightning-fast speeds and seamless connections with this powerful and versatile range extender. With its dual-band technology, you can enjoy faster and more stable connections on all your devices, from smartphones to smart TVs to gaming consoles.

Setting up the TP-Link RE-200 AC750 is quick and easy, thanks to its intuitive web interface and step-by-step instructions. Whether you're a tech guru or a beginner, you can easily customize your settings and find the perfect location for your range extender with its intelligent signal indicator.

And with its sleek and modern design, the TP-Link RE-200 AC750 is more than just a powerful tool – it's a stylish addition to any space. Its compact size and unobtrusive style make it the perfect complement to your décor, while its powerful performance ensures that you'll never have to deal with slow Wi-Fi again.

Upgrade your internet experience with the TP-Link RE-200 AC750 Wi-Fi Range Extender – the ultimate solution for stronger, faster, and more reliable Wi-Fi coverage in your home or office.

1.     Locate a power outlet: Find a power outlet near the area where you want to extend your Wi-Fi signal. The outlet should be within a reasonable distance of your router, but still within range of the area you want to cover.

2.     Reset the range extender: Press and hold the reset button on the side of the RE-200 for about 5-10 seconds until the power LED starts flashing. This will reset the range extender to its default settings.

3.     Connect to the range extender: Using a Wi-Fi-enabled device such as a laptop, smartphone, or tablet, connect to the Wi-Fi network named "TP-Link_Extender_XXXXXX" (the X's represent the last six digits of the range extender's MAC address, which can be found on the bottom of the device).

4.     Configure the range extender: Open a web browser and enter "tplinkrepeater.net" in the address bar. If the page does not load, try "192.168.0.254" or "192.168.1.1". You will be prompted to enter a username and password. The default username is "admin" and the password is also "admin".

5.     Select your Wi-Fi network: Once logged in, select the Wi-Fi network you want to extend from the list of available networks. Enter the password for your network when prompted and click "Next".

6.     Configure the extender's settings: Choose your preferred network name (SSID) and password for the extended network. You can also select the wireless frequency band (2.4GHz or 5GHz) you want to use for the extended network.

7.     Save the settings: After configuring the settings, click "Save" to apply the changes. The range extender will reboot and apply the new settings.

8.     Connect to the extended network: Once the range extender has rebooted, connect your Wi-Fi-enabled devices to the new extended network using the new network name and password you configured.

That's it! You should now have extended your Wi-Fi network using the TP-Link RE-200 AC750 Wi-Fi Range Extender.