

Software Defined Networking (SDN) with Cloud Access
Omada’s Software Defined Networking (SDN) platform integrates network devices, including access points, switches and gateways, providing 100% centralized cloud management. Omada creates a highly scalable network—all controlled from a single interface. Seamless wireless and wired connections are provided, ideal for use in hospitality, education, retail, offices, and more.

Technical Specifications
HARDWARE FEATURES
Standards and Protocols
- IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3az, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.1x
Interface
- 24× 10/100/1000 Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX)
- 4× Gigabit SFP Slots
Network Media
- 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
- 100BASE-TX/1000Base-T: UTP category 5, 5e or above cable (maximum 100m)
- 1000BASE-X: MMF, SMF
Fan Quantity
Power Supply
PoE Ports (RJ45)
- Standard: 802.3at/af compliant
- PoE+ Ports: 24 Ports
- PoE Power Budget: 250 W*
Dimensions ( W x D x H )
- 17.3 × 8.7 × 1.73 in (440 × 220 × 44 mm)
Mounting
Max Power Consumption
- V1: 308.6 W (110V/60Hz with 250 W PD connected); 32.1 W (110 V/ 60 Hz with no PD connected)
- V2: 294.7 W (220 V/50 Hz) (with 250 W PD connected)
- V3: 291.9 W (110V/60Hz) (with 250 W PD connected)
- V4: 306.9 W (110V/60Hz) (with 250 W PD connected)
Max Heat Dissipation
- V1: 1052.94 BTU/h (with 250 W PD connected); 109.53 BTU/h (with no PD connected)
- V2: 1005.66 BTU/hr (220V/50 Hz) (with 250 W PD connected)
- V3: 996.01 BTU/hr (110V/60Hz) (with 250 W PD connected)
- V4: 1047.30 BTU/hr (110V/60 Hz) (with 250 W PD connected)
PERFORMANCE
- Switching Capacity 56 Gbps
- Packet Forwarding Rate 41.7 Mpps
- MAC Address Table • V1, V2, V4 and above: 8K, • V3: 16K
- Packet Buffer Memory 4.1 Mbit
- Jumbo Frame 9 KB
SOFTWARE FEATURES
Quality of Service
- 802.1p CoS/DSCP priority
- 8 priority queues
- Priority Schedule Mode
- - SP (Strict Priority)
- - WRR (Weighted Round Robin)
- Queue Weight Config
- Bandwidth Control
- - Port/Flow based Rating Limit
- Smoother Performance
- Storm Control
- - Multiple Control Modes(kbps/ratio)
- - Broadcast/Multicast/Unknown-Unicast Control
L2 and L2+ Features
- 32 IP Interfaces
- - Support IPv4/IPv6 Interface
- Static Routing
- - 32 IPv4/IPv6 Static Routes
- DHCP Server
- DHCP Relay
- - DHCP Interface Relay
- - DHCP VLAN Relay
- DHCP L2 Relay
- Static ARP
- Proxy ARP
- Gratuitous ARP
- Link Aggregation
- - Static link aggregation
- - 802.3ad LACP
- - Up to 8 aggregation groups and up to 8 ports per group
- Spanning Tree Protocol
- - 802.1D STP
- - 802.1w RSTP
- - 802.1s MSTP
- - STP Security: TC Protect, BPDU Filter/Protect,
- Root Protect
- Loopback Detection
- Flow Control
- - 802.3x Flow Control
- Mirroring
- - Port Mirroring
- - CPU Mirroring
- - One-to-One
- - Many-to-One
- - Flow-Based
- - Ingress/Egress/Both
- Device Link Detect Protocol (DLDP)
- 802.1ab LLDP/ LLDP-MED
Advanced Features
- Automatic Device Discovery
- Batch Configuration
- Batch Firmware Upgrading
- Intelligent Network Monitoring
- Abnormal Event Warnings
- Unified Configuration
- Reboot Schedule
VLAN
- VLAN Group
- - Max. 4K VLAN Groups
- 802.1Q tag VLAN
- MAC VLAN: 12 Entries
- Protocol VLAN
- GVRP
- Voice VLAN
Access Control List
- Support up to 230 entries
- Time-Range
- - Time Slice
- - Week Time-Range
- - Absolute Time-Range
- - Holiday
- Time-based ACL
- MAC ACL
- - Source MAC
- - Destination MAC
- - VLAN ID
- - User Priority
- - Ether Type
- IP ACL
- - Source IP
- - Destination IP
- - IP Protocol
- - TCP Flag
- - TCP/UDP Source Port
- - TCP/UDP Destination Port
- - DSCP/IP TOS
- IPv6 ACL
- Combined ACL
- Rule Operation
- - Permit/Deny
- Policy Action
- - Mirror
- - Rate Limit
- - Redirect
- - QoS Remark
- ACL Rules Binding
- - Port Binding
- - VLAN Binding
- Actions for flows
- - Mirror (to supported interface)
- - Redirect (to supported interface)
- - Rate Limit
- - QoS Remark
OTHERS
Certification
Package Contents
- TL-SG2428P
- Power Cord
- Installation Guide
- Rackmount Kit
- Rubber Feet
System Requirements
- Microsoft® Windows® XP, Vista™ or Windows 7/8/10/11, MAC® OS, NetWare®, UNIX® or Linux.