915 Generation 4800KV Motor 35A ESC and Programming Card for 1/16 1/18 RC C

Motor: 4 poles 12 slot Hi- motor design. machined 6061 T6 billet alumium heatsink can. High copper windings maximizes efficiency. High RPM ABEC5 oversized bearings. Universal fits 1/16 brushless -multi-mounting system for M2.5 screws.
Precision balanced , smoothness for best reliability and maximum RPM. Stator - Super Thin (0.35mm) laminations. Removable/replaceable. Precision engineered for maximum energy conversion.
Electric Speed Controller; Compatible with sensorless brushless motors. High anti-interference capability.
Using advanced software interface to set up or update the software. Super and accurate throttle linearity. Fast response to throttle input. Mutiple protection features: low voltage cut-off protection, over-heat protection and throttle signal loss protection.
Motor: RPM: 4800KV; Max Current: 24A; Max : 300W; Can Size: 2435; Sensored: No; Shaft Diameter: 2mm; Shaft Length: 12mm; Connector: 3.5mm; Max voltage: 7.4V(2S)-11.1V(3S); 35A Brushless ESC Electric Speed Control Waterproof for 1/14 1/16 RC Car Off Road Truck;Cont.Current/Burst Current:35A Motor Type: Sensorless Brushless Motor
For 2s or 6 cells NIMH: 1.on-road:28XX-size or smaller motor with the KV less than 6000; 2.Off-road/Monster: 28XX-size or smaller motor with the KV less than 4000
For 3s or 9 cells NIMH: 1.on-road:28XX-size or smaller motor with the KV less than 4000; 2.Off-road/Monster: 28XX-size or smaller motor with the KV less than 3000
Instuctions: 1.Connect BEC wires with the receiver;2.Connect motor wires with ESC;3.Turn on the transmitter;4.Connect battery pack with ESC then switch on the ESC.5.When the connection of motor and battery is finished, the motor emits "Beep-Beep" tone.6.When the throttle stick is in the neutral position, the motor re-emits "Beep-Beep" tone.7.The ESC is workable.
Programming Card for RC Car ESC Brushless Electronic Speed Controller:
Features:Light weight;Easy to use;Portable design;Programming Card for RC Car ESC Brushless Electronic Speed Controller,which specially designed for Brushless Electronic Speed Controller selled in .
Low voltage cut off:3.1V/Cell 2.8V/Cell 3.3V/Cell No cut-off mode:Medium,soft,strong
Max brake force:25%,50%,75%,100%
Max reverse force:25%,50%,75%,100%
Neutral range:6%,9%,12%,work state
colour: black + red
Material: plastic + metal
Size: Motor size: 24x30x15mm, ESC size:37x26x15mm Package Contents:
1 x motor
1 x ESC
1 x programming card Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.