915 Generation 50PCS Low Temperature Easy Melt Aluminum Universal Silver Welding Rod Cored Wire 1.6mm Rod Solder No Need Solder Powder

Melting point:about 400 ℃
Applications:For Aluminum, Iron, Copper material

Product:Aluminum Welding Rods
Instructions:
Step 1: polish the surface through physical cleaning.
Step 2: heat the base metal surface at the welding place until the temperature reaches 380 ℃ - 400 ℃ of the working temperature of the welding wire. In this way, the welding wire can be melted by the heat conduction of the base metal. Do not burn the welding wire with flame. Also, the welding wire can flow and penetrate into the metal capillaries well only when the base metal surface temperature is sufficient.
Step 3: when repairing thin aluminum, just heat the aluminum base metal to the appropriate working temperature, and then use the welding wire to rub and melt back and forth to form a weld. Only use the metal brush to fill the molten welding wire in the welding area to form a weld
Operation attention details
1. The surface of base metal must be cleaned. Clean and weld immediately
2. The temperature of the base metal must reach 400 ℃, including the temperature of the base metal during welding, which can be high or low.
3. It is forbidden to burn the welding wire with flame deliberately. After the temperature of the base metal reaches 400 ℃, the welding wire will naturally melt by heat conduction of the base metal.
Colour:Silver
Material:aluminum
Size:Diameter:1.6 mm, Length:33 cm

Package Contents:
50 * Welding Rod

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.