915 Generation 60CM 4 Pin USB3.0 Cable for Mining PCI-E Powered Riser Card

Brand new and high quality
, more efficient, more practical
4PIN adapter 12V DC-DC to strengthen the power supply, the card power supply from the motherboard, which to reduce the burden on the motherboard when connect multi- card card power supply with four solid capacitors, card power supply more stable and .
Solve the problem that welding fragile burn, transmission signal attenuation, platoon line length is not enough and so on Slots with fixed card buckle, remove the card and the fixed , the card will not fall off from the slot
PCI-E connector with multi-layer shielded wire, the can connect 3 the signal will not attenuate
Specifications:
Power Connector: 6 pin power cable
Compatible use: with any cards
Colour:Blue
Material:PC+metal
Size:13cm x 4.4cm x 1.2cm Package Contents:
12 x PCI-E 16X adapter
12 x PCI-E 1X riser board
12 x USB3.0 cable
12 x 15Pin-4Pin Power cable
Note:
1. This extension is applicable to the mainboard PCI - E slot (1 x 2 x, 4 x 8 x 16 x). plug in the power cord for the floppy. When plug PCI - E extension must be computer broken wires plug again.
2. The form a complete wire rod is customized, never grab line to plug in. that!
3. When plug wire must identify the direction, not to counter or , prevent burning equipment, plug wire when the socket of equipment first, then plug wire, avoid too hard plug socket pin is broken.
4. Dual-core Suggestions with the line, the mainboard is 16 x also recommends using the row line! Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.