915 Generation 60cm USB3.0 PCI-E 1x To 16x Extender Riser Card Adapter Blue

and high quality; , more efficient, more practical.
6PIN adapter 12V DC-DC to strengthen the power supply, the graphics card power supply from the motherboard, which to reduce the burden on the motherboard when connect multi-graphics card.
Graphics card power supply with four solid capacitors, graphics card power supply more stable and ; Solve the problem that welding fragile burn, transmission signal attenuation, platoon line length is not enough and so on.
Slots with fixed card buckle, remove the graphics card and the fixed graphics, the graphics card will not fall off from the slot.
PCI-E connector with multi-layer shielded wire, the can connect 3 the signal will not attenuate.
Color: Blue
Material: plastic
Power Connector: 6 pin power cable
The board size：12.7cm*4.2cm
USB Cable Length:60cm
Compatible use: with any graphics cards
Note:
1. This extension is applicable to the mainboard PCI - E slot (1 x 2 x, 4 x 8 x 16 x). plug in the power cord for the floppy. When plug PCI - E extension must be computer broken wires plug again.
2. The form a complete wire rod is customized, never grab line to plug in. that!
3. When plug wire must identify the direction, not to counter or , prevent burning equipment, plug wire when the socket of equipment first, then plug wire, avoid too hard plug socket pin is broken.
4. Dual-core graphics Suggestions with the line, the mainboard is 16 x also recommends using the row line!
Package included：
1x PCI-E 16X adapter
1x PCI-E 1X riser board
1x USB3.0 cable
1x 15Pin-6Pin Power cable
Note: Random color, 't accept the specified color.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.