915 Generation DC 6.5-100V 0-20A LCD Energy Meter Battery Tester

and High Quality
1. Electrical parameter measurement function (voltage, current, active power, energy)
2. Voltage alarm function (over voltage alarm , backlight and voltage flashing to alarm).
3. -screen LCD (display voltage, current, active power, energy at the same time)
4. the backlight has memory function, it can the on or off state when power off
Set voltage alarm :
Step1: Long press the key until the power display area display ""SET"", then release the key.
Step2: After enter this state, the voltage area display the current high voltage alarm value, the current area display the current low voltage alarm value and the last digit begin to flash, then you can short press to plus 1, when there is no operation over 3 seconds, it will switch the digit position automatically, from the high voltage alarm value to the low voltage alarm value, there are six digits, the range of the voltage alarm is 6.5~99.9V;
Step3: After finish the setting, long press the key until the screen display "PASS",that means you set successfully and will exit the setting state automatically.
Function:
1. It can display voltage, current, power, energy parameters at the same time.
2. Display : 6.50~99.99V Current: test range: 0~20A Display : 0.00~20.00
3. Display Power: test range: 0~2k Within 1KW, the display is 0.0~999.9W; 1KW and above, the display is 1000~2000W
Type: Digital Voltage Meter
Size: 89.6mm
Color: Black
Material: plastic
Package Contents:
1pc * Digital Voltage Meter
Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.