915 Generation Digital Multifunction Meter Watt Power Volt Amp Current Test

1. electrical parameter measurement function (voltage, current, active power).
2. The power button clear function.
3. Power-down data storage function (cumulative power down saving).
4. PC PC display function (display voltage, current, active power).
5. The serial communication function (comes with TTL serial interface, via various terminals communicate with the adapter plate, read, and set the parameters). B. front display and key 1. Power: measurement range 0 ~ 22kW
0 ~ 10kW within the display of 0.000 to 9.999;
Within 10 ~ 22kW display 10.00 ~ 22.00.
2. Power: measurement range 0 ~ 9999kWh
0 ~ 10kWh within the display of 0.000 to 9.999;
10 ~ 100kWh within the display of 10.00 to 99.99;
100 ~ 1000kWh within the display of 100.0 to 999.9;
1000 ~ 9999kWh and above the display from 1000 to 9999.
3. Voltage: Test Range 80 ~ 260VAC
Display 110.0 ~ 220.0.
4. Current: measurement range 0 ~ 100A
Display 00.00 to 99.99.
A built-in button on the panel, used to make electricity clear function, as shown in 2.
Electricity clear : Press ZERO key seconds, then release the button! Press again to clear the key, the data is cleared and exit charge cleared, cleared so completed.
Considerations: 1. This module is suitable for indoor, not outdoor use.
2. the applied load should not the rated power.
3. The wiring can not be wrong.
Working voltage: 80 ~ 260VAC
Test voltage: 80 ~ 260VAC
Rated power: 100A / 22000W
Working Frequency: 45-65Hz
Measurement accuracy: 1.0
Material: PC+Metal
colour: As shown Package Contents:
1 x Digital Multi-function Meter
1 x Coil Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.