915 Generation EBB36 CAN V1.0 Board for Klipper Hotend Head Tool 36mm

1. With and RESET buttons reserved, users can update the firmware via DFU mode by USB. Added protection circuit on the thermistor avoids burning the main control chip caused by leakage current from the heating rod.
2. can select the thermistor's pull-up resistors values through jumper wire, so as to support PT1000 (2.2K pull-up resistors), which makes it convenient for DIY. Connect the USB witha jumper cap to power on, which effectively isolates the main control board DC-DC from USB 5V.
3. Reserved I2C interface allows for filament broke and clogged detection, and supports other DIY functions. Added anti-flyback diodes on the heating rod and fans' ports effectively the MOS tube from being burned due to reverse voltage.
4. Anti-reverse connection protection on the power interface prevents users from burning the motherboard when mistakenly connecting the reverse power line during DIY. Onboard MAX31865 supports selecting 2-wire or 4-wire of PT100/ PT1000.
5. Supports communication via CAN or USB. The terminal resistor 120R of be throughthe jumper cap, and it reserves CAN expansion interfaces. Equipped ESD protection chip on the USB port prevents the main control board from being broken down by the static electricity of the USB port. Introduction of EBB:
EBB=Extruder Breakout Board EBB36 CAN V1.0 is a nozzle adapter board specially designed for the 36 extruder .
Tree Technology Co., . They can communicate via USB port, or CAN BUS, greatly simplifying wirings.
size:42mm / 36mm
Material: plastic
colour: black Package Contents:
1 x Extruder Breakout Board Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.