This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeElectronicsPortable Audio & VideoMP3 & MP4 Player AccessoriesCablesData & Power CablesEMMC Module 16GB with Adapter for NanoPi/PC/RK3399 Developme
KSh 5,103
KSh 9,59447%
In stock
+ shipping from KSh 426 to CBD - UON/Globe/Koja/River Road
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees KSh 426
Ready for pickup between 27 June & 01 July when you order within next 11hrs 53mins
Door Delivery
Delivery Fees KSh 536
Ready for delivery between 27 June & 01 July when you order within next 11hrs 53mins
Return Policy
Easy Return, Quick Refund.Details
Warranty
None
Seller Information
Glittering
66%Seller Score
11 Followers
Seller Performance
Order Fulfillment Rate: Average
Quality Score: Excellent
Customer Rating: Poor
Product details
Programming system to eMMC module:
Prepare an SDHC card with a capacity of 8G or above, unzip the EFlasher firmware and the flash tool win32diskimager separately, and run win32diskimagerI as an administrator under Windows. On the interface of win32diskimagerI, your SD card drive After decompressing the EFlasher firmware, click the Write button to burn to the SD card, or use the dd to write the EFlasher firmware to the SD card under Linux.
After the programming is completed, eject the SD card from the computer, insert the development board and the development board, then the system will from the SD card and automatically.
EFlasher programming tool, you have multiple ways to operate EFlasher. 1: Connect or LCD display and USB mouse, operate EFlasher on the graphical interface. 2: Connect the development board to the LAN through a network cable, log in to the development board through ssh, and then enter the eflasher to operate according to the prompts of the line. (Note: The logged in by ssh is , the password is , and the development board IP can be viewed (Obtained in the background of the router). 3: Log in to the serial terminal through the debugging serial port, enter the eflasher on the terminal to operate. 4: Connect an Icd2usb accessory to the development board, press the accessory. The K1 key above can select the system to be programmed, then press the K2 key to confirm the programming, the programming will be displayed on lcd2usb.
After the programming is completed, cut off the power, then pull out the SD card on the development board, and then power on again, the development board will the system you just programmed from eMMC.
Colour: blue
Material: plastic
Size: 18.5x16mm
Package Contents:
1 * 16GB EMMC Module
1 * -SD turn eMMC adapter Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.
Prepare an SDHC card with a capacity of 8G or above, unzip the EFlasher firmware and the flash tool win32diskimager separately, and run win32diskimagerI as an administrator under Windows. On the interface of win32diskimagerI, your SD card drive After decompressing the EFlasher firmware, click the Write button to burn to the SD card, or use the dd to write the EFlasher firmware to the SD card under Linux.
After the programming is completed, eject the SD card from the computer, insert the development board and the development board, then the system will from the SD card and automatically.
EFlasher programming tool, you have multiple ways to operate EFlasher. 1: Connect or LCD display and USB mouse, operate EFlasher on the graphical interface. 2: Connect the development board to the LAN through a network cable, log in to the development board through ssh, and then enter the eflasher to operate according to the prompts of the line. (Note: The logged in by ssh is , the password is , and the development board IP can be viewed (Obtained in the background of the router). 3: Log in to the serial terminal through the debugging serial port, enter the eflasher on the terminal to operate. 4: Connect an Icd2usb accessory to the development board, press the accessory. The K1 key above can select the system to be programmed, then press the K2 key to confirm the programming, the programming will be displayed on lcd2usb.
After the programming is completed, cut off the power, then pull out the SD card on the development board, and then power on again, the development board will the system you just programmed from eMMC.
Colour: blue
Material: plastic
Size: 18.5x16mm
Package Contents:
1 * 16GB EMMC Module
1 * -SD turn eMMC adapter Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.
Specifications
Key Features
- Durable and good quality
- EMMC Module
- Extension Board
- -SD turn eMMC adapter
- for NanoPi
- Development Board
- The details are as described above
What’s in the box
1 * 16GB EMMC Module
1 * Micro-SD turn eMMC adapter
1 * Micro-SD turn eMMC adapter
Specifications
- SKU: 91933EA363LCMNAFAMZ
- Model: EMMC Module
- Production Country: China
- Size (L x W x H cm): 3x3x3
- Weight (kg): 0.0055
- Main Material: plastic
- Warranty Address: None
Customer Feedback
This product has no ratings yet.
915 Generation EMMC Module 16GB with Adapter for NanoPi/PC/RK3399 Developme
KSh 5,103
KSh 9,59447%
Questions about this product?