This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeComputingSoftwareAntivirus & SecurityInternet SecurityM.2 B+M Single-Port 10GbE Network Card RJ45 Ethernet Network Adapter AQC107 Industrial Control Grade Server Network Card
/product/80/5371251/1.jpg?4587)
/product/80/5371251/2.jpg?4587)
/product/80/5371251/3.jpg?4587)
/product/80/5371251/4.jpg?4587)
/product/80/5371251/5.jpg?4587)
/product/80/5371251/6.jpg?4587)
Share this product
Shipped from abroadNon-Returnable
915 Generation M.2 B+M Single-Port 10GbE Network Card RJ45 Ethernet Network Adapter AQC107 Industrial Control Grade Server Network Card
KSh 27,504
KSh 52,25847%
In stock
+ shipping from KSh 1,994 to CBD - UON/Globe/Koja/River Road
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees KSh 1,994
Ready for pickup between 21 May & 24 May when you order within next 8hrs 22mins
Door Delivery
Delivery Fees KSh 2,054
Ready for delivery between 21 May & 24 May when you order within next 8hrs 22mins
Return Policy
Easy Return, Quick Refund.Details
Warranty
None
Seller Information
Nehami
60%Seller Score
13 Followers
Seller Performance
Order Fulfillment Rate: Very Poor
Quality Score: Excellent
Customer Rating: Average
Product details
On-chip high-resolution cable analyzer for advanced cable diagnostics
Energy Efficient Ethernet (EEE) support
Support IEEE1588v2 precision time protocol
Supports large send offload, receiver scaling (RSS), direct cache access (DCA) and headers
Checksumming improves network performance and reduces host CPU utilization
Wake-on-LAN (WoL) power management
Supports IPv4, IPv6 and IPv6/UDP checksum offload
Supports jumbo frames (up to 16kbytes)
Quality of Service (QoS)
Supports up to eight traffic classes and Data Center Bridging (DCB)
Chip processor:Marvell/AQC107
Applicable network:10GbR server network card
Main controller:Marvell AQC107
Bus type:M.2 B+M KEY
Media interface:1 x RJ45 copper cable
Transmission rate:10G/5G/2.5G/1000/100Mbps
Network topology:10GBASE-T / 5GBASE-T / 2.5GBASE-T / 1000BASE-T / 100BASE-T
IEEE 802.3bz, IEEE 802.3, IEEE 802.3x, IEEE 1588, IEEE 802.3az
-Energy Efficient Ethernet (EEE)
Management functions:IPMI pass-through via SMBus or NC-SI, iSCSI boot, WoL, PXE remote boot, VLAN filtering
Firmware environment:
Operating temperature:0 - 55°C (32 - 131°F)
Storage temperature:-40 - 70 ℃ (-40 - 158 ℉)
Storage humidity:90% non-condensing relative humidity at 35°C
Colour:Green
Material:PCB
Package Contents:
1 x Network Card
1 x CD
1 x Short Iron Piece
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Energy Efficient Ethernet (EEE) support
Support IEEE1588v2 precision time protocol
Supports large send offload, receiver scaling (RSS), direct cache access (DCA) and headers
Checksumming improves network performance and reduces host CPU utilization
Wake-on-LAN (WoL) power management
Supports IPv4, IPv6 and IPv6/UDP checksum offload
Supports jumbo frames (up to 16kbytes)
Quality of Service (QoS)
Supports up to eight traffic classes and Data Center Bridging (DCB)
Chip processor:Marvell/AQC107
Applicable network:10GbR server network card
Main controller:Marvell AQC107
Bus type:M.2 B+M KEY
Media interface:1 x RJ45 copper cable
Transmission rate:10G/5G/2.5G/1000/100Mbps
Network topology:10GBASE-T / 5GBASE-T / 2.5GBASE-T / 1000BASE-T / 100BASE-T
IEEE 802.3bz, IEEE 802.3, IEEE 802.3x, IEEE 1588, IEEE 802.3az
-Energy Efficient Ethernet (EEE)
Management functions:IPMI pass-through via SMBus or NC-SI, iSCSI boot, WoL, PXE remote boot, VLAN filtering
Firmware environment:
Operating temperature:0 - 55°C (32 - 131°F)
Storage temperature:-40 - 70 ℃ (-40 - 158 ℉)
Storage humidity:90% non-condensing relative humidity at 35°C
Colour:Green
Material:PCB
Package Contents:
1 x Network Card
1 x CD
1 x Short Iron Piece
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Specifications
Key Features
On-chip high-resolution cable analyzer for advanced cable diagnostics
Energy Efficient Ethernet (EEE) support
Support IEEE1588v2 precision time protocol
Supports large send offload, receiver scaling (RSS), direct cache access (DCA) and headers
Checksumming improves network performance and reduces host CPU utilization
Wake-on-LAN (WoL) power management
Supports IPv4, IPv6 and IPv6/UDP checksum offload
Supports jumbo frames (up to 16kbytes)
Quality of Service (QoS)
Supports up to eight traffic classes and Data Center Bridging (DCB)
Chip processor:Marvell/AQC107
Applicable network:10GbR server network card
Main controller:Marvell AQC107
Bus type:M.2 B+M KEY
Media interface:1 x RJ45 copper cable
Transmission rate:10G/5G/2.5G/1000/100Mbps
Network topology:10GBASE-T / 5GBASE-T / 2.5GBASE-T / 1000BASE-T / 100BASE-T
IEEE 802.3bz, IEEE 802.3, IEEE 802.3x, IEEE 1588, IEEE 802.3az
-Energy Efficient Ethernet (EEE)
Management functions:IPMI pass-through via SMBus or NC-SI, iSCSI boot, WoL, PXE remote boot, VLAN filtering
Firmware environment:
Operating temperature:0 - 55°C (32 - 131°F)
Storage temperature:-40 - 70 ℃ (-40 - 158 ℉)
Storage humidity:90% non-condensing relative humidity at 35°C
Colour:Green
Material:PCB
Package Contents:
1 x Network Card
1 x CD
1 x Short Iron Piece
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Energy Efficient Ethernet (EEE) support
Support IEEE1588v2 precision time protocol
Supports large send offload, receiver scaling (RSS), direct cache access (DCA) and headers
Checksumming improves network performance and reduces host CPU utilization
Wake-on-LAN (WoL) power management
Supports IPv4, IPv6 and IPv6/UDP checksum offload
Supports jumbo frames (up to 16kbytes)
Quality of Service (QoS)
Supports up to eight traffic classes and Data Center Bridging (DCB)
Chip processor:Marvell/AQC107
Applicable network:10GbR server network card
Main controller:Marvell AQC107
Bus type:M.2 B+M KEY
Media interface:1 x RJ45 copper cable
Transmission rate:10G/5G/2.5G/1000/100Mbps
Network topology:10GBASE-T / 5GBASE-T / 2.5GBASE-T / 1000BASE-T / 100BASE-T
IEEE 802.3bz, IEEE 802.3, IEEE 802.3x, IEEE 1588, IEEE 802.3az
-Energy Efficient Ethernet (EEE)
Management functions:IPMI pass-through via SMBus or NC-SI, iSCSI boot, WoL, PXE remote boot, VLAN filtering
Firmware environment:
Operating temperature:0 - 55°C (32 - 131°F)
Storage temperature:-40 - 70 ℃ (-40 - 158 ℉)
Storage humidity:90% non-condensing relative humidity at 35°C
Colour:Green
Material:PCB
Package Contents:
1 x Network Card
1 x CD
1 x Short Iron Piece
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
What’s in the box
1 x Network Card
1 x CD
1 x Short Iron Piece
1 x CD
1 x Short Iron Piece
Specifications
- SKU: 91933DS2ZHJC5NAFAMZ
- Model: Computer Accessories
- Production Country: China
- Size (L x W x H cm): 15x10x5
- Weight (kg): 0.15
- Main Material: PCB
- Warranty Address: None
Customer Feedback
This product has no ratings yet.
/product/80/5371251/1.jpg?4587)
915 Generation M.2 B+M Single-Port 10GbE Network Card RJ45 Ethernet Network Adapter AQC107 Industrial Control Grade Server Network Card
KSh 27,504
KSh 52,25847%
Questions about this product?