915 Generation POE 1000M Network Protector POE 1000M Monitor Camera Surge Protector RJ45 Gigabit Ethernet Protection Device Arrester

Item Description
POE 1000M Network -Protector POE 1000M monitor Camera Surge Protector RJ45 Gigabit Ethernet Protection device Arrester
1000M RJ45 Ethernet Cat5e6 surge protector with POE support It simply installs in-line on an RJ45 Cat5e6 cable The arrestor has two RJ45 female jacks so the in-line installation is a easy and straight forward
It protects any Ethernet devices like switches routers laptopsPCsIP Camera etc from damaging surges caused by- or static electricity Moreover because of PoE feature it ALLOWS PoE enabled devices to remain powered while still against damaging -strikes or voltage spikes

Material plastic metal
Color as shown
Features
Fast energy absorption on over-voltage
Low resistance and capacitance - influence on data link
Easy in-line installation two RJ45 female connectors
Specification
Product Name Gigabit POE Network -Protector
Protection object POE network switch POE camera terminal with POE power supply function
Interface RJ45
Response time Less than 1ns
Rated operating voltage 48V
Transfer rate 1000Mbps
Continuous operating voltage 57V
Working temperature -30 ~ 70 degrees Celsius
Operating humidity 30%-90%
notes
Two things are crucial and should NOT be missed when using the Ethernet surge protector
positioning IN on the unprotected part of cable and OUT on the side of cable
Reversed installation will still allow network and operation there will be no-surge protection at all
proper grounding note the yellowgreen ground wire This wire must be connected to proper electrical ground in the
Ask a qualified electrician about such grounding orsearch the Internet for information
Without proper grounding the surge protector will be unable to drain the excess voltage and will be ineffective

Package Contents
1 x POE Network -Surge Protection Device

Only the above package content other products are not included
Note Light reflection and different displays may cause the color of the item in the picture a little different from the real thing The measurement allowed error is - 1-3cm