915 Generation RP2040 Development Board for Pico

RP2040-0.42LCD is a high-performance Development board ,Integrated 0.42inch LCD (70x40 resolution).with flexible digital interfaces. It incorporates for 's RP2040 microcontroller chip.The RP2040 features a dual-core Arm -M0+ processor clocked at 133MHz with 264KB internal SRAM and 2MB internal flash storage.
Inside the RP2040 is a 'permanent ROM' USB UF2 bootloader. What that means is when you to new firmware, you can hold down the BOOTSEL button while plugging it into USB (or pulling down the RUN/Reset pin to ground) and it will appear as a USB disk drive you can drag the firmware onto.
There is great C/C++ support, unofficial ( really good) for support, You can also use for micropthon and for circuitpython.
RP2040 32-bit M0+ dual core running at ~125 MHz @ 3.3V and power 264 KB RAM
2 MB SPI FLASH chip for storing files and for CircuitPython/for MicroPython code storage. No EEPROM
Four 12 bit ADCs ( than Pico)
Two I2C, Two SPI and two UART peripherals
Integrated 0.42inch LCD
Both Reset button and Bootloader select button for quick restarts (no unplugging-replugging to relaunch code)
1x RGB(GPIO2)
3.3V power indicator LED
3.3V regulator with 500mA current output
USB Type C connector lets you access built-in ROM USB bootloader and serial port debugging
Size & Weight
Size: 23.5 x 18 mm
Weight: 2.5g
DOCUMENTS
https://github./01Space/RP2040-0.42LCD
Colour:Purple
Material:PCB Package Contents:
1 x RP2040 Development board Only the above package content, other are not included.
Note: Light reflection and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.