This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeElectronicsHome AudioStereo System ComponentsCD & Tape PlayersCD PlayersTPA3221 Digital Power Amplifier Board 100Wx2 Stereo DC 19V-3
KSh 7,637
KSh 14,35647%
2 units left
+ shipping from KSh 604 to CBD - UON/Globe/Koja/River Road
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees KSh 604
Ready for pickup between 20 May & 23 May when you order within next 9hrs 37mins
Door Delivery
Delivery Fees KSh 664
Ready for delivery between 20 May & 23 May when you order within next 9hrs 37mins
Return Policy
Easy Return, Quick Refund.Details
Warranty
None
Seller Information
Glittering
94%Seller Score
9 Followers
Seller Performance
Order Fulfillment Rate: Excellent
Quality Score: Excellent
Customer Rating: Good
Product details
TPA3221 is a high-power Class D amplifier that can achieve high-efficiency operation in full power, idle and standby states.
The device uses closed-loop feedback with a bandwidth of up to 100kHz to low distortion in the audio frequency band and achieve quality.
The device operates with AD or low idle current HEAD (high-efficiency AD mode) modulation and can 2 x 105W power for a 4Ω load or 1 x 208W power for a 2Ω load.
Integrated Protection: Undervoltage, Overvoltage, -by- Current Limit, Short Circuit, Clipping Detection, Overtemperature Warning andShutdown, and DC Speaker Protection
90% Efficient Class-D Operation (4 Ω). Pin-Compatible Family of Devices with Voltageand Power-Level Stereo (2 x BTL) and Mono (1 x PBTL) Operation
Output Power at 10% +N:
1. 105-W Stereo into 4 Ω in BTL Configuration
2. 112-W Stereo into 3 Ω in BTL Configuration
3. 208-W Mono into 2 Ω in PBTL Configuration
Output Power at 1% +N:
1. 88-W Stereo into 4 Ω in BTL Configuration
2. 100-W Stereo into 3 Ω in BTL Configuration
3. 170-W Mono into 2 Ω in PBTL Configuration
5-V Gate Drive or Built-in LDO for Optional Single-Supply Operation
Closed-Loop Feedback Design:
1. Signal Bandwidth up to 100 kHz for High-Frequency Content From HD Sources
2. 0.02% +N at 1 W into 4 Ω
3. 60-dB PSRR (BTL, No Input Signal)
4. Less than 75-μV Output Noise (A-Weighted)
5. 108-dB (A-Weighted)
6. AD or HEAD Modulation Schemes
Low-Power Operating Modes:
1. Standby Modes: Mute and Less than 1 mA Shutdown
2. Low Idle-Current HEAD Modulation Scheme
3. Single-Channel BTL Operation
Multiple Input to Simplify -Amp Design:
1. Differential or Single-Ended Analog Inputs
2. Selectable Gains: 18 dB, 24 dB, 30 dB, 34 dB
Working voltage: DC19V-30V, DC24V is recommended
Size: 103 x 78MM
Maximum Power Per Channel: 100W
Model Number: TPA3221 Digital Class D HIFI Audio Amplifier Board
color:Photo color
Material:plastic Package Contents:
1 x Digital Power Amplifier Board Only the above package content, other are not included.
Note: Light reflection and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.
The device uses closed-loop feedback with a bandwidth of up to 100kHz to low distortion in the audio frequency band and achieve quality.
The device operates with AD or low idle current HEAD (high-efficiency AD mode) modulation and can 2 x 105W power for a 4Ω load or 1 x 208W power for a 2Ω load.
Integrated Protection: Undervoltage, Overvoltage, -by- Current Limit, Short Circuit, Clipping Detection, Overtemperature Warning andShutdown, and DC Speaker Protection
90% Efficient Class-D Operation (4 Ω). Pin-Compatible Family of Devices with Voltageand Power-Level Stereo (2 x BTL) and Mono (1 x PBTL) Operation
Output Power at 10% +N:
1. 105-W Stereo into 4 Ω in BTL Configuration
2. 112-W Stereo into 3 Ω in BTL Configuration
3. 208-W Mono into 2 Ω in PBTL Configuration
Output Power at 1% +N:
1. 88-W Stereo into 4 Ω in BTL Configuration
2. 100-W Stereo into 3 Ω in BTL Configuration
3. 170-W Mono into 2 Ω in PBTL Configuration
5-V Gate Drive or Built-in LDO for Optional Single-Supply Operation
Closed-Loop Feedback Design:
1. Signal Bandwidth up to 100 kHz for High-Frequency Content From HD Sources
2. 0.02% +N at 1 W into 4 Ω
3. 60-dB PSRR (BTL, No Input Signal)
4. Less than 75-μV Output Noise (A-Weighted)
5. 108-dB (A-Weighted)
6. AD or HEAD Modulation Schemes
Low-Power Operating Modes:
1. Standby Modes: Mute and Less than 1 mA Shutdown
2. Low Idle-Current HEAD Modulation Scheme
3. Single-Channel BTL Operation
Multiple Input to Simplify -Amp Design:
1. Differential or Single-Ended Analog Inputs
2. Selectable Gains: 18 dB, 24 dB, 30 dB, 34 dB
Working voltage: DC19V-30V, DC24V is recommended
Size: 103 x 78MM
Maximum Power Per Channel: 100W
Model Number: TPA3221 Digital Class D HIFI Audio Amplifier Board
color:Photo color
Material:plastic Package Contents:
1 x Digital Power Amplifier Board Only the above package content, other are not included.
Note: Light reflection and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.
Specifications
Key Features
- Durable and good quality
- Digital power amplifier board
- power amplifier board
- Audio Amplifier Board
- Amplifier Board
- TPA3221 Amplifier Board
- The details are as described above
What’s in the box
1 x Digital Power Amplifier Board
Specifications
- SKU: 91933EA201EY6NAFAMZ
- Model: Digital power amplifier board
- Production Country: China
- Size (L x W x H cm): 12x8x2
- Weight (kg): 0.21
- Main Material: plastic
- Warranty Address: None
Customer Feedback
This product has no ratings yet.
915 Generation TPA3221 Digital Power Amplifier Board 100Wx2 Stereo DC 19V-3
KSh 7,637
KSh 14,35647%
Questions about this product?