Ascent 1piece For ET-54 ET-54B ET-67 LH-DC60 LH-DC80 LH-DC90 ET-65III ET-83C ET-86 camera Lens Hood for canon lens camera

Product Description

ET-54:

The hood is a common photographic acceory set in front of the camera lens. It has the following functions:1. In the case of backlight, side light or flash photography, it can prevent the entry of non-image light and avoid haze.2. In the light and side light photography, the scattered light around can be avoided into the lens.3. When lighting or photographing at night, you can avoid the ambient interference light entering the lens.4. It can prevent accidental damage to the lens, or avoid the accidental contact of the lens surface, and in a certain extent, protect the camera from wind and snow.The hood is widely used for backlighting photography and generally avoids glare. However, glare is still poible if the light source is close. At this point, you can use your hand to block the hood on one side of the light source. If the glare is eliminated, you should observe clearly from the viewfinder.Its functions are as follows:1. In the case of backlight, side light or flash photography, it can prevent the entry of non-image light and avoid haze.2. In the light and side light photography, the scattered light around can be avoided into the lens.3. When lighting or photographing at night, you can avoid the ambient interference light entering the lens.4. It can prevent accidental damage to the lens, or avoid the accidental contact of the lens surface, and in a certain extent, protect the camera from wind and snow.for Canon EF 55-200mm f/4.5-5.6 II USM 80-200mm F4.5-5.6 IIIPackage:

1 x ET-54 Lens Hood

ET-54B:

Name: lens hood

Type: ET-54B

Material: ABS envmental plastics

Interface: bayonet(support the buckle)

Applicable machine: canon EF-M machinemm STM

Product features:

Protect the lens from stray light, the inner wall of the light shield adopts matte proceing anti - reflective, ar installation can also be installed with canon lens cover, and support in the lens.

Package:

1 x ET-54B Lens Hood

ET-67:

for Canon EF 100mm f/2.8 Macro USM EF 100mm f/2.8 MacroPackage:

1 x ET-67 Lens Hood

LH-DC60:

Product descriptionDescriptionThis is the LH-DC60 lens hood designed for Canon PowerShot cameras. Replace your old one or grab an extra today. The lens hood is an eential part of your camera and digital photography, the hood will protect your lens from debris and damage as well as prevent unwanted light from affecting your shots, ultimately improving image quality and contrast. It's a perfect and convenient companion for your camera!Compatiblefor CANON PowerShot SX1 ISfor CANON PowerShot SX10 ISfor CANON PowerShot SX20 ISfor CANON PowerShot SX30 ISReplaces LH-DC60 Lens HoodNote: Acceory ONLYColor: BlackPackage1pcs  LH-DC60 lens hood

LH-DC80:

For Canon Power Shot G1X Mark II G1XII

Package:

1 x LH-DC80 Lens Hood

LH-DC90:

his Lens Hood is designed to prevent unwanted stray light from entering the lens by extending and shading the end of the lens. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact.

The "petal" shape of this lens hood maximizes the amount of hood coverage for the minimum amount of weight and hood area. This dedicated lens hood is designed to match the specific focal length of the lens it was designed for.

Features : and high quality.The lens hood provides a cost-effective solution to the probl caused by sun glare rain and wind-blown debris and is also valuable in providing protection against knocks and damage.In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact Lens hoods block side glare and augment the protection provided by filters to the lens surface and ring.The design makes it firmly on the lensHood Type: LH-DC90Hood Material: PlasticColor: Black as Photo

Compatible With :

Canon PowerShot SX60 HS

Package1pcs  LH-DC90 lens hoodET-65III:

Product Description:

(Third Party) Design for Canon lens, same function as ET-65III

Compatible with:

for CANON EF 85mm f/1.8 USMfor CANON EF 100mm f/2 USMfor CANON EF 135mm f/2.8 Soft focusfor CANON EF 70-210mm f/3.5-4.5 USMfor CANON EF 100-300mm f/4.5-5.6 USM

A lens hood shades the lens from stray light, improving your contrast and image quality.

It can aist in keeping moisture or wind-blown debris off the lens;

and it protects the front barrel from the inevitable impacts against walls, door frames, and other real-life obstacles

Package Including:1 x  Lens hood

ET-83C:

for Canon EF 100-400mm f4.5-5.6L IS USM

Package:

1 x ET-83C Lens hood

ET-86:

Description

Lens hood replacement for Canon ET-86- Provides multiple functions: shades the lens from stray light, improves your contrast and image quality in inclement weather, aists in keeping moisture or wind-blown debris off the lens, protects the front barrel from the inevitable impacts against walls, door frames, and other real-life obstacles- Material: Plastic- Color: black

Compatible with:

- Canon EF 70-200mm f/2.8L IS USM

Package includes:

- 1x ET-86 lens hood

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.