BLUEQUE 168W UV Led Nail Lamp, Nail Light For Gel Polish With 4 Timer Setting

This UV LED nail lamp uses a professional advanced dual light source technology that makes it compatible with all UV gel nail polish and LED gel nail polish (e.g. nail polish glue, nail polish UV glue, nail sculpture glue, LED nail glue, nail polish glue, gem glue. It takes about 10 seconds for the nail UV glue to dry.

SPECIFICATIONS:

42 UV/LED beads 

Maximum power consumption: 168w

Timer: 10s/30s/60s and 99s low heat mode

Display: LCD display

AC input: 100V~240V

DC output: 24V

Product Size: 235*200*80mm/9.3"X7.9"X3.1" (L*W*T)

Wave length: 365~405nm

Lifespan: 50000H

How to Cure a Nail With a UV Lamp?

1. Clean hands and nails well,Cut the nails to the appropriate length. After softening the nail surface with a softener and trim the edges of the nails with a nail file.

2.Apply one thin coat of the gel with the gel brush. Start at the middle of the nail and brush it on the way you would brush on regular nail polish, without pressing down as hard. Take care not to get any of the gel on your cuticle.

3. Connect the power cord to a safety outlet. Use the appropriate timer (10s / 30s / 60s / 99s low heat mode) depending on your gel polishing requirements.

4. if the gel feels sticky after curing, don't forget to wipe your nails with detergent or alcohol.

5. Please note that the curing time varies based on the different gel polishes used. UV LED nail lamp works well for all kinds of gel polishes, not for regular nail polish.

* 1 x NATOME 168W UV LED Nail Lamp

* 1 x Instruction manual

* 1 x 100-240V wide voltage adapter