Flysky FGR4P 2.4GHz 4CH AFHDS 3 RC Receiver

Features:

The FGr4P uses AFHDS 3(Third Generation Automatic Frequency Hopping Digital System).

It uses a single antenna with two-way transmission capabilities and is designed to be compact and easy to install. It can output standard PWM, i-BUS, and PPM.

Suitable for AFHDS3 system remote controller.

Ultra-small size and ultra-lightweight, effectively save space and reduce item's weight-bearing.

Any problem, please contact our store without hesitation. Honor to serve you.



Specification:

Product Model: FGr4P

PWM Channel: 4

Wireless Frequency: 2.4GHz

Wireless protocol: AFHDS 3

Range:> 200m (ground)

Antenna type: single antenna (150mm)

: 3.5-8.4V

RSSI: Supported

Data port: PWM / PPM / i.bus / s.bus

Temperature range: -10 ℃ — + 60 ℃

Humidity range: 20% -95%

Online Update: Yes

Size: 29 * 22 * 16.2mm

Weight: 8g



CH 1-CH 4: Connects the servos, supply, or other components

i-BUS: for channel expansion or connect sensors

BIND: For bind cable

Battery: Connect the battery



Binding:

1. Insert the binding cable into the receivers bind port

2. Plug the cable into any other port, and the receivers LED will start to flash quickly indicating that it has entered bind mode

3. Put the transmitter into bind mode; (See the transmitters instruction manual for more information)

4. Binding is successful when the receivers LED will stop flashing

Remove the and bind cables from the receiver.

5. Reconnect the cable to the receiver

6. Check to make sure that the transmitter and receiver are working as expected, if there are any issues or unexpected operation follow the steps above to bind again.



Package information:

Package size: 8 * 5 * 3cm

Package Weight: 10g

Polybag package

Package list: 1*FGr4P receiver; 1*Binding cable