Galaxy Zinc Power Galvanizing Spray Anti-Rust 400ml - Prevents Rust and Corrosion Metal Electroplating for Welded Riveted Joints Car Body

This highly active metal electroplating zinc spray with high zinc content provides metal protection against corrosion and rust and gives a bright appearance after electroplating. 

Zinc spray creates a fast drying, cohesive film that is resistant to salt, water and high temperatures.

Suitable for repair and protection of welded joints, riveted joints, intermediate layer in local welding and highly effective anti-rust for car body painting.
Mainly for long-term protection of metal objects such as iron molds, iron outer pipes, iron towers, steel molds, bridges and signs used outside and inside.
 

Precautions:

In case of eye contact, wash immediately with plenty of water and seek medical advice.
Ensure proper protection and ventilation during operation and drying.
Contents are highly flammable and compressible. Keep away from heat, flames, sparks, and any other sources of ignition.
Keep in a dry and cool place. Avoid crushing, puncturing and burning the can.
 

Instructions:

Surface preparation: The surface must be free of dirt, grime, oil, decayed sheets, or anything else that may hinder performance.
Spray: Shaking can be continued until the glass bead is moved inside the can, which is done a minute or two before spraying and during use to be one-handed and prevent settling. Keep the can at a distance of 20 cm from the surface to be sprayed. 

Press the spray button firmly, even tapping while moving the can rapidly back and forth.

For preparation: 2-3 layers of painting are required depending on the thickness.