15M Exterior Car Chrome Moulding Body Strip Bumper Auto Door Protective Styling Trim Sticker

Descriptions:
1.Dual-purpose: Suitable for front grille, headlights, rearview mirrors, taillights, hood pillars, bumper trims, wheel cover trims, etc. Can also be used for interior decoration: center console, radio, speakers, interior panels, door handles, shift knobs, etc.2.Extend Service Life: Our door strips can preserve the value, service life or durability of your car, and the edge moldings have sunlight preservation function. The stripes will not fade or damage the paint surfaces.3.High Performance: The advantages of installing bumpers strips are to restore high-quality driving environment. The strips can keep the interior of the car clean, improve sealing, provide better sound insulation and reduce noise.4.Easy to Install: The shape can be cut and can be easy to cut it to the appropriate length you need. Straight and curved edges can be easily installed, and no glue is required. The tape is designed to stick to the edge of the inner door, so no remain  will be left after taking off the door trim.5.High Quality: The strip adopts high-quality ABS material, with self-adhesive tape and chrome plating. It can withstand heat, abrasion and aging. For most general vehicles, it can keep your vehicle from cuts and scratches.
Specifications:
Length: 15 MetresWidth: Optional Material: soft PVC galvanizedColor: electroplated silverApplicable vehicles: generalFunction: used for decoration, avoiding collision, concealing scratches, etc.Installation location: car window, car body, rearview mirror, center grid, bumper, etc.
Reference Position:
1.Front window trim strips: about 3-3.2m/118.11-125.98in in length, using a width of about 2CM/0.79in.2.Rear window trim strips: about 2.8-/110.24-118.11in  in length, using a width of 2CM/0.79inRearview mirror decoration and avoid collision: about 0.3m/11.81in in length, using a width of about 1cm/0.39in.3.Avoid collision at the door: about 1m/39.37in in length, using a width aabout 1cm/0.39inUpper light eyebrow decoration strip: the length of the double light is about 1m/39.37in, using a width of about 1cm/0.39in.4.Lower light eyebrow decorative strip: the length of the double lights is about 1 meter/39.37in, using a width of about 1.5m/59.05in.5.Four-corner collision-avoiding strip: about 2 meters/78.74in, using a width of about 1cm-2cm/0.39-0.79inFront large enclosure decoration collision-avoiding: about 2.6 to 3 meters/102.36-118.11in, using a width of about 1cm-2cm/0.39-0.79in.6.Rear large enclosure decoration collision-avoiding: about 2.8 to 3.2 meters/110.24-125.98in, use a width of about 1.5cm/ or 2cm/0.59 or 0.79in.
Packing List:
1xCar Chrome-plated Bumper Strip
Installation Notes:
1. Thoroughly clean the place where the car body needs to be pasted. If there is oil or wax, wipe it off with alcohol.2. After tearing off the preservative film on the back of the bright strip, stick it carefully, and then subtract the excess.3. If the temperature is below 20 degrees, it is recommended to bake the adhesive with electric hot air before sticking to get good results. Do not wash the car within 1 day after sticking.
Notes:
1. If you find that the oversized decorative strip is difficult to paste, you can choose double-sided tape to help paste it.2. It is recommended that you wipe off dirt and moisture before use. If the weather is cold, you need to use a hair dryer to blow hot air for one minute, and then paste it on, it will be firmer.3. Please allow slight tolerances in size due to manual measurement, and lighting in photography may result in difference in color than it is in real life.