1800W 40A 12V-48V ZVS Induction Heating Board Module DIY

This induction heating board has a maximum of 1800W, with super PCB layout design and super heat sink. It could work continuously under the condition of good heat dissipation due to superior heat dissipation effect. 



Features:

Maximum is 1800W, heating evenly, and very convenient.

12-48V low voltage DC supply with a maximum current of 40A.

With a cooling fan interface, can also do Tes-la discharge, generator voltage inverter, etc.

Adopts PCB layout design and qualified heat sink with great heat dissipation.

Can use graphite crucible to melt gold, silver, copper, aluminum and other metals.



Specifications:

Input: 12-48V

Max. : 1800W

Max. current: 40A

Heater circle inner: 70mm / 2.76in

Item size: 185 * 90 * 85mm / 7.28 * 3.54 * 3.35in

Package size: 300 * 140 * 120mm / 11.81 * 5.51 * 4.72in

Item weight: 879g / 1.94pounds

Package weight: 1107g / 2.44pounds



Note:

1. When using a switching supply, make sure that the supply voltage is stable before connecting to the induction heating circuit.

2. Do not heat metal that is too large or it may be overloaded. Please add a 35A fuse or ammeter.

3. Although this driver board can withstand more than 40A, it is recommended not to exceed 48V 35A to prevent accidents and damage.

4. The minimum input voltage of the module is 12V, the voltage of 12V must be greater than 10A to use the supply.

5. If you find that the MOS tube is hot, first consider whether the output meets the requirements.

6. Do not clear the circuit board, otherwise it will emit a very high frequency of noise, and then the MOS tube will burn out.

7. It is recommended to use a 36V 20A supply. Below 12V is very dangerous.



Package List:

1 * PCB Board

1 * Copper Tube