2015 60W 8000LM Kit LED Headlight 30W Bulbs H7 H11 9005 9006 HB3 HB4

Socket Type: H7
Application: Headlight Headlamp High or Low Beam Bulb
Power: 60W/Set (30W / per bulb)
Lighting Color: Pure White, 6000K
Light Source: Latest ETI Flip Chip Technology Chips
LED Type: ETI Special 2 Cree High Power LED Chip / Light
Operating Voltage: DC 12V-24V
Waterproof Rate: IP68
Optional Color: Silver
Beam Angel: 360 Degrees
Housing Material: Top Quality 6063 Aviation Aluminum
Lumen: 7200LM
Life Span: about 30000 hours
Operating Temperature: -40℃～+80℃

Features:
Detachable light base metal plate, easy to install
ETI Flip High Quality 2nd Generation Newest Intelligent LED Chips
6063 top quality aviation aluminum alloy accelerate the heat dissipation to better heat dissipation
Super Quality Not need Ballasts, Relay and Cooling fan
High heat dissipation performance product
No need warm up/ballasts/relay

Use a combination of three kinds of metals:
I. Copper (heat conduction rate second only to silver)
II. Silver (speed up conduction velocity)
III. T6063 aerospace grade aluminum radiators to form a meshed structure, best heat conduction.
Radiator heat sink aluminum total area about the size of an A4 sheet of paper.
More advanced use of professional automotive ETI chips (heat resistant up to 150 °C)
the best subject of your car headlights, enjoy luxury car level LED headlamps of superiority.
Automotive LED headlamps advantages:
LED lights more power than traditional halogen energy
Xenon lamp brightness and proximity, but the LED lights light up without delay
LED power driver with 12V-24V voltage constant current mode
LED car headlights simple structure, fewer parts than xenon lamps
significantly lower than the xenon lamp failure rates
Automotive LED headlamps color temperature balancing
In the same color to clear of the Xenon bulbs about 6000K

Installation:
1. Make sure that the car has had time to cool down properly before starting the installation process.
2. Make sure to have the ignition turned off and the car keys removed.
3. Put the vehicle into (P) park or make sure it is securely in gear.
4. Be careful to avoid cutting or crushing the bulbs.
5. Do not touch the bulbs with your fingers, as this will cause blotting.
6. Fully inspect all the connection of the contact points, sockets and the wires as faulty connections can cause lighting problems.
7. Make sure that the end of the bulb does not come in contact with the interior light shield or any part of the headlight when adjusting the bulb.

Package includes:
1 Pair 6000K Pure White ETI LED Headlight Bulbs