20G USB 3.2 Gen2 Type C Female To Type E Male 20P Shielded Flat Ribbon Cable

20Gbps 5V Double Angled USB 3.2Type-CTo Type-E Male Female Flat Extension Cable With PCI baffle For ITX/ATX motherboard A4 Case

Brand name: ADT-LINK

Product name: USB 3.2 Type-C to Type-Eflat cable

Product model: UTF3.2-MF/FM/MM-20P series

Transfer speed: USB3.2Standard 20Gbps

Wire length: 3~300 cm, the length can be customized,

Current capacity: 3A within 50cm ; 1.5A within 1 meter Product application: ITX/ATX motherboard built-in internal 20Pin USB connector or type-e connector, suitable for A4-ITX chais customized side panel USB type-C port. ADT USB series Part-Number Description:

S=USB-A ; C=USB-C ; W=USB-B ; F=USB-E

Cable length Description:

The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector. For the wire length, please refer to the 5cm blue arrow in the figure below.

Product Model description:

Note 1: T6B/T6A/T6A-NC is Type-C straight male; T9A/T9A-NC is Type-C Up angled male; T7B is Type-C straight female; T8T is Type-C up angled female with slotted hole T8T-BK is Type-C up angled female with slotted hole, Baffle; F6A is Type-E straight male connector; F9T is Type-E up angled female connector with slotted hole. Note 2: What is the difference between product model T6A with and without ?

T6A with refers to the PCB with RT1710 e-mark from RichTek, which supports high current 3A, up to 5A. Compatibility, scalability, and security are relatively good. Support Alternate Mode, Vendor Defined Meage (USB PD) The T6A-NC version without a is only suitable for general use and does not support high current. The USB data transmiion function can still be used normally.

Product image: Product real shot: Summary of technical iues:

1. Can wires and PCB connectors be split?

No, in order to purify the signal transmiion and avoid the accident of wire falling off, our wire and PCB connectors is soldering and protected by the heat shrinkable tube sleeve, so the product can not be separated.

2. Cable thickne? Can it be bent?

The thickne of the wire is 1.4mm, and it can be bent and folded without affecting the use.

3. Is there any EMI shieldingfor Cable?

No metal shield. The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emiions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.