2PCS Relay Module with Optocoupler High/Low Level Trigger for Arduino 12V Relay 8 Channel

It is 8 Channel Isolated 12V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as for Arduino, AVR, PIC, ARM, DSP, etc., very convenient.
Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A; Trigger current of opto-isolator: 5mA.
RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move; With optical coupling isolation, triggering more reliable, more stable.
EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper.

Input Interface:
DC+:connect to power positive (according to the relay voltage range)
DC-: connect to power negative
IN: relay module trigger pin (high or low level trigger Optional)
Relay Output:
Normally Opened (NO) : normally open pin of relay. NO pin is not connect to COM pin when relay off.NO pin is connect to COM pin when relay on;
Common pin (COM) : Common pin of the relay;
Normally closed (NC) : normally close pin of relay.NC pin is connect to COM pin when relay off.NC pin is not connect to COM pin when relay on.
Material:ABS
colour:As Shown

Package Contents:
2 x Relay Module

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.