3 Ounce Clear Crystal Resin Quick Curing AB Resin 1:1 Clear Hard Epoxy Resin Jewelry Making for Molds Casting Resin Art

Epoxy Resin is excellent for jewelry making.
It is also widely used in castings,decorative purposes and all crafts.
It can be cured under normal temperature and high temperature,
with the feature of non-toxic,low odor,good flowing property,
natural defoaming, anti-yellow, self doming, high transparency, no ripple, bright in surface.

Resin Kit Includes:
2PC

Instructions:
1 Measure part A and part B according to the volume ratio (A:B=1:1) into two plastic measuring cups,
stir slowly for 2 minutes until the mixture clears,
place it along for 3 to 5 minutes to allow the bubbles to dissipate, and then it can be used.

2 Working time: 25 ° 90 minutes (100ml mixture)
Curing conditions: 25 ° 8-24 hours or (at 50 ° bake for 2 hours)

3 You can use molds to cast resin shapes. Or fill beautiful metal bezels.
Change the resin color with pigments and mica powders, add glitters for sparkling effects and create beautiful faux Opals.
Or draw a creative resin painting. Play your imagination and make any resin crafts you like.

Note:
1 Must mix AB glue according to the volume ratio (A:B=1:1) .
But Glue A is higher volume than glue B, around 1.1-1.5 times,
So your weight difference must be controlled in 5%,
for example, if AB glue is 100 gram, A glue 55 g, and B glue need 45- 55 g.
2 1:1 Resin is fast-curing glue than 3:1 Resin, the top can be curing after one hour,
Completely curing, It needs around 8-12 hour in summer, and winter 12-20 hour
The higher temperature, the shorter curing time .
3 We suggest not stir too much below 50 grams every time .
Because it cure easily in the short time, the top can be curing after one hour.
4 The time of stirring had better is over 60 seconds,
and must wait to bubbles to dissipate.