300CC/200CC Air Manual Oil Car Brake Oil Change Tool Hydraulic Clutch Oil Bleeder Empty Exchange Drain Kit Universal

Product name: car brake oil change oil change hine brake oil change drain ing unit;

Product material: ABS+copper;

Product features: easy to , ble, car repair tool;

Product Dimensions: 15cm x 24.5cm / 5.91" x 9.65" (approx.)

Tube Length: 80 cm / 31.5 inches (approx.)

The package includes:

1 oil bottle

1 vae

1 x Tube

1 connector

Steps

1. First suup the old oil in the car brake oil tank;

2. Pour the new brake into the brake tank;

3. Connect the new brake oil to the brake oil outlet of the brake cylinder and turn the screw to release the oil 4. Connect the air compreor line and start ing oil;

5. Pull out the old brake oil, and add new oil while ing the old oil, which can prevent the air from entering, and the brake oil can be repd by a single person;

6. A small number of models are slow to , you can remove the drain screw, and the thin tube we provided to insert the screw hole to oil;

Kind ts:

The old brake oil should be ed from each wheel until the oil drain vae stops ing when the new oil flows out;

Instructions for using the tool

Keep using the tool in a good working envment to ensure quality and reliable performance. e sure the ignition key is removed to prevent inadvertent starting of the engine.

If the vehicle does not turn off, e sure the gear and the parking brake are safe

Pay attention to protect your eyes to prevent accidental ng. If brake gets into your eyes, rinse with plenty of water and seek attention. If swallowed, seek attention immediately.

Wear appropriate clothing to avoid scratches and contamination, no jewelry and hair.

Keep children and unauthorized personnel away from the work area.

Keep work areas well lit.