3D Matte Frosted Adhesive Window Film Uv Stained Glass Sticker 30x200cm

-Partial privacy protection blurs unwanted views, 3D pattern irregular texture decorates your personal space, on the surface with glue, simple peel and stick installation, easy to cut and trim
Main characteristics:Partial privacy: it's nice to feel safe at homeWith glue: just use water or soapy water to install, no sticky glue requiredUnique Pattern: Decorate your home windows with stylish patterns
Installation instructions:
1. Measure the area and cut the film. Leave an extra inch allowance on each side for easy adjustment.2. Clean the target surface thoroughly and make sure the surface is clean enough without any dust.3. Remove the transparent backing film on one short side. (Very important!!!)4. Spray plenty of water or soapy water on both the smooth side of the window film and the window, then install the window film on the window.5. Use the soft towel or squeegee to wipe the film back and forth to ensure that the bubbles and water have been completely removed.6. Cut the edges and use a cloth to flatten the film. There you go!
How to Peel Clear Backing Film:
Step 1 - Please wet a corner of the window film and use your fingers to twist it for a while to loosen the fastener between the window film and the transparent backing film;Step 2 - Please attach an adhesive tape to the corner side of the transparent backing film (we also attached a small adhesive tape on each roll of window film for your convenience), then press it for effective fixation;Step 3 - And then you can easily separate the transparent backing film from the window film.