5G/s Double Angled USB 3.0 Internal 19/20Pin Male To Male Mainboard Int.19P

5Gbps Double Angled USB 3.0 Internal 19/20Pin Male To Male Int.19p Front Panel Connector Extension Flat Cable with Screws

Brand name: ADT-LINK

Product name: USB 3.0 Int.19P male to Int.19P maleflat cable

Product model: UFF3.0-MM-20P series

Transfer speed: USB3.0Standard 5Gbps

Wire length: 3~300 cm, the length can be customized,

Current capacity: 5V/3A within 50cm ; 5V/1.5A within 1 meter Product application: USB 3.0 internal 19/20Pin front panel connector extension cable. ADT USB series Part-Number Description:

S=USB-A ; C=USB-C ; W=USB-B ; F=USB-E

Cable length Description:

The length of the wire refers to the part of the visible wire. It does not include the PCB and the connector. For the wire length, please refer to the 5cm blue arrow in the figure below.

Product Model description:

Product Name

Product Model

speed bandwidth

USB 19pin double male Tx-Tx signal direct connection Cable

U F1C-UF1C

USB 3.0 5Gbps

USB 19pin double male angled Tx-Tx signal direct connection Cable

U F1C-DL-UF1C-DL

USB 3.0 5Gbps

USB 19pin double male Tx-Rx signal exchange cable U F1C-UF1D USB 3.0 5Gbps USB 19pin double male angle Tx-Rx signal exchange cable U F1C-DL-UF1D-DL USB 3.0 5Gbps

Note 1:The USB3.0 master end is connected to the slave end, and the Tx of the master end should be connected to the Rx of the slave end. Please confirm the USB Tx-Rx exchange of your device and select the correct cable. Note 2: what is the difference between F1C-F1D signal exchange and F1C-F1C signal directly connected ? F1C-F1C's USB is Tx-Tx, Rx-Rx that are signal direct connection, F1C-F1D's USB is TX-Rx, Rx-Tx that are signal exchange. Product image: Product real shot:

Summary of technical iues:

1. Can wires and PCB connectors be split?

No, in order to purify the signal transmiion and avoid the accident of wire falling off, our wire and PCB connectors is soldering and protected by the heat shrinkable tube sleeve, so the product can not be separated.

2. Cable thickne? Can it be bent?

The thickne of the wire is 1.4mm, and it can be bent and folded without affecting the use.

3. Is there any EMI shieldingfor Cable?

No metal shield. The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emiions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.