80W 100W Amplifier 12V Bluetooth 5.0 Audio MP3 Board Color Screen

DC 5V-26V 2*40WModel: JQ-D009BT (Power amplifier 2*40W)

Bluetooth version 5.0

Power amplifier ICC673E, power: 2*40W (80W requires voltage value: DC25V)

Bluetooth call function

function

Music format: MP3 / WMA / WAV / FLAC / APE lole format music

Radio FM frequency: 87.5-107.5 MHZ

Folder switching function

Support function introduction: support MP3 / USB / TF/ LINE IN / FM / BLUETOOTH/remote control connection/DC 5V-26V

About the structure: Panel size: length 112 * width 62 MM, the panel is surrounded by screw holes, the depth of the board is 22MM

function description

1. Long pre the MODE on to start , long pre the MODE on again to cancel the function and play the file;

2. When , you need to connect a storage device, such as U disk or TF card;

Under storage devices, such as U disk or TF card, long pre the PLAY/PAUSE on (play/pause) to enter the folder and play the file;

DC 7V-22V 2*50W

Product s:

Model: JX-Y04 (2*50W stereo, power supply 7V-22V)

Size: 112*61MM

Function Description:

1. Bluetooth version 5.0

2. Support calling (long pre the pause on to answer the call when there is a call).

3. Support . only supports operation in TF mode or USB mode.

When , you need to connect a storage device, such as: U disk or TF card;)

4. Support power-off memory

5. The power supply voltage supports between DC 7v-22v, and the current is between 1-4A.

6. Can be directly connected to speakers

7. Support song format MP3/WMA/WAV/APE/FLAC

8. Main functions MP3/USB/TF/LINE IN/FM/BLUETOOTH/remote control/

9. Power 100W, stereo 2*50W.

10. Support folder selection to play. When USB or TF is playing, there is a folder in the device and there are songs in the folder. Pre the previous on or the next on twice to select the folder to play songs, and the screen will display F001-F00? and so on, yes? A folder displays F00? .

DC 8V-24V 2*40W

Stereo output power:

1. 2*40W (VDD=23V, RL=8 Ω)

2. 2*30W(VDD=16V), RL=4Ω

3. 2*20W(VDD=12V), RL=4Ω

Ba output power:

1. 80W (VDD=23V, RL=4 Ω)

2. 64W (VDD=21V, RL=4 Ω)

3. 47W (VDD=18V, RL=4 Ω)

Function Description:

Size: 112*61MM

1. Bluetooth version 5.0

2. Support calling (long pre the pause on to answer the call when there is a call).

3. Support . only supports operation in TF mode or USB mode.

(Long pre the MODE on to start , long pre the MODE on again to cancel the and play the recorded file; exit the mode and long pre the pause on to exit. When , you need to connect a storage device, such as a U disk or TF card;)

4. Support power-off memory

5. The power supply voltage supports between DC 8v-24v, and the current is between 1-4A.

6. Can be directly connected to speakers

7. Support song format MP3/WMA/WAV/APE/FLAC

8. Main functions MP3/USB/TF/LINE IN/FM/BLUETOOTH/remote control/

9. Stereo 2*40W. Woofer power 80W

10. Support folder selection to play. When USB or TF is playing, there is a folder in the device and there are songs in the folder. Pre the previous on or the next on twice to select the folder to play songs, and the screen will display F001-F00? and so on, yes? A folder displays F00? .

Time setting operation method: short pre the clock on, enter the clock mode, the screen fes at the hour number position, then use the next on and the previous on to adjust the time to be set, and then short pre the clock mode to enter the minute setting. After the adjustment is completed, pre the clock on again to confirm the current time setting.

Operation method of alarm clock setting: short pre the alarm on to enter the alarm mode and the screen fes at the hour number position, then use the next on and the previous on to adjust the time to be set, and then short pre the alarm mode to enter the minute setting. Also use the previous on to down After the adjustment is completed, short pre the alarm on again, and the screen will display NO (continue)/OFF (close). When the alarm clock rings, short pre the alarm on to cancel the alarm reminder.

DC 7V-25V 2*40W

Bluetooth version 5.0Power: 2*40WBluetooth calling function functionMusic format: MP3/WMA/WAV/FLAC/APE lole format musicRadio FM frequency: 87.5—108 MHZFolder switching functionSupport function introduction: support MP3 / USB / SD / LINE IN / FM / BLUETOOTH / remote control connection / DC 12V (voltage range 7V-25V, current not le than 2A)1. Description of function1. Long pre the MODE on to start , long pre the MODE on again to cancel the function and play the recorded file;2. When , it is neceary to connect a storage device, such as: U disk or TF card;Under the storage device, such as U disk or TF card, long pre the PLAY/PAUSE on (play/pause) to enter the folder and play the file;2. on and interface function1. PREV: Twist to the left to select the previous song;NEXT: Twist right to select the next song;2. IR: infrared receiving module;3, MIC: support call and functions;4. USB interface: connect U disk (maximum support 32GB);5. LED: dial screen display;6. SD card slot: connect SD memory card (maximum support 32GB);7. AUX interface: audio input interface;8. Volume knob: control the volume;9. REC: Pre and hold the REC on to start , pre the REC on again to cancel the function and play the recorded file; when , you need to connect a storage device, such as a U disk or SD card;10. REPEAT: Pre the single loop function once, pre it again to cancel the single loop, and play it in sequence;11. FD-: The short key is to switch to the previous folder, and the long pre is to rewind;12. FD+: Short key is to switch to the next folder, long pre is fast forward;13. PLAY/PAUSE: Short pre is to switch between pause and play; long pre is to radio FM automatic station;14. MODE: Switch between USB / SD / FM / AUX / BLUETOOTH;