Adapter Card For SD To 3.5" 40Pin Male IDE Hard Disk Drive Card With

Description:

This riser card allows you to connect to a standard ATA IDE interface with an SD card as a standard IDE storage device.

1x standard IDE 3.5' interface; 1x standard SD socket; 1x standard large 4Pin power connector

The POWER power supply can be powered by a hard disk. The card only needs to be powered by 5V. The normal working voltage is 5V±0.25V. Operating current is less than 200mA.

This card PIO, Multi-word DMA and DMA Host data transfer modes;

The SD socket up to 128GB SDXD cards.

Connect the power supply and IDE cable. After the SD card is inserted into the SD socket, the conversion board is equivalent to an electronic hard disk, and no driver is required. After installing the operating system, the operating system (such as windows98, etc.) can be booted via the SD memory card.

The data transfer rate is high, and the speed is roughly the same as the system hard disk speed (ATA/133, U-DMA mode3).

Package Includes:

1x SD to 3.5inch IDE Card

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a