Audio Technica VM95E Moving Magnet Stereo

AT-VM95E VM95 series Elliptical stereo cartridge

The AT-VM95E, the new Audio-Technica entry model Elliptical cartridge will replace the legendary AT95E and take advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts.

Aluminium cantilever

4.0mV output voltage

Compatible body with all VM95 Series stylus aemblie

Replacement for AT95E and AT95EX

20 to 22,000Hz frequency response

VM95 Series - Styli compatibility

Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer neceary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP

AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges

The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Profeional DJ Mixers.

VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, neverthele, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Profeional DJ Mixers.

Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.

The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including poible manualing and back-cueing.

The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ATN-XP7

ATN-XP5

ATN-XP3

Elliptical Bonded Stylus

Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion.

No use of nuts

VM95 Series cartridges features two M2.6 threaded inserts allowing the installation of the cartridge onto tonearm or removable headshell without the use of nuts.Each cartridge is provided with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.

Specifications

Cartridge & Stylu

Frequency Response

20 - 22,000 Hz

Channel Separation

20 dB (1 kHz)

Vertical Tracking Angle

23°

Vertical Tracking Force

1.8 to 2.2g (2.0g standard)

Stylus Construction

Bonded Round Shank

Recommended Load Impedance

47,000 Ω

Coil Impedance

3.3 kΩ (1 kHz)

DC Resistance

485 Ω

Coil Inductance

550 mH (1 kHz)

Output Voltage

4.0 mV (@ 1 kHz, 5 cm/sec)

Output Channel Balance

2.0 dB (1 kHz)

Stylus Shape

Elliptical

Cantilever

Aluminium

Static Compliance

17 x 10 – 6 cm / dyne

Dynamic Compliance

7 x 10 – 6 cm / dyne (100 Hz)

Mounting

1/2” centre

Cartridge Weight

6.1g

Dimension

17.2 x 18.9 x 28.3 ( H x W x D mm)

Acceories Included

Two 11 mm installation screws; Two 8 mm installation screws; Two washer

Model

AT-VM95E

Recommended Load Capacitance

100-200 pF

Replacement Stylu

AT-VMN95E

Stylus Size

0.3 x 0.7 mil

Type

VM Stereo Dual Magnet

Wire Used for Coil

T.P. Copper

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.