Brushless Motor 2200KV 40A ESC 6035 Propeller 9G Micro

Features:

Safety arming feature: Regardless the throttle stick position, the motor will not spin after battery connected.

Throttle calibration funtion: Throttle range can be calibrated to be compatible with different transmitters. User programmable.

Multiple procedure methods supported: transmitter stick, LED procedure Card. Very easy to procedure the ESC at home or at the flying field. Timing can be changed to be suitable for different brushless motors.

This is the most popular mini servo. Only weighs 9 gram and gives you a 1.5-1.7kg/cm (4.8V-6V) torque. Pretty strong regarding its size.

Full protection: low voltage cutoff protection / over-heat protection / throttle signal loss protection.



Specification:

ESC Parameters:

Current: 40A

Output Capacity: Continuous Current 40A, Short-time Current 55A (not less than 10 Seconds)

Input: 2-4 Lithium Batteries(Not Included)

BEC Output: 5V@3A (Linear Regulator Mode - Linear Mode)

Maximum Speed: 210,000 rpm for 2-pole Motor, 7000 rpm for 6-pole Motor, 35,000 rpm for 12-pole Motor

Size: (Approx) 68x25x8mm



9g Servo Parameters:

Size: 21.5mmX11.8mmX22.7mm

Weight: 9 grams

No Load Speed: 0.12 sec / 60 deg (4.8 V)

Locked-rotor Torque: 1.5-1.7kg/cm (4.8V-6V)

Operating Temperature: -30~~+60 degrees Celsius

Dead Zone Setting: 5 Microseconds

Working Voltage: 4.8V-6V



Motor Parameters:

KV: 2200

Ri(M Ω): 0.033

Battery: 2-3Li-Po

Max : 342W

Test Prop: 7x3/7x4

Motor Size: 27.5x38mm

Shaft Diameter: 3.17mm



Package Information:

Package Size: 7*5*2cm

Package Weight: 135g

Plastic Package



Packing List:

1* 2200KV Motor

1* 40A ESC(XT60 Plug)

2* 9g Servo

2* 6035 Propeller

1* Some Other Fittings