Car Bluetooth Handsfree 5.0 Car Kit Mini 3.5 mm AUX Handsfree Stereo Audio Receiver Adapter for Car Headset Speakers

Product s:

Interface: 3.5

Plug and Play: Plug and Play

nsmiion rate: 2400Mbps

Bluetooth standard: 5.0

Size: 70 * 14 mm

Frequency response: 20Hz-15Khz

Bluetooth frequency: 2.4GHz

Power charging: 5V, 500mA

nsmiion distance: 10m

Working time: up to 4-5 hours standby energy saving

Product support: A2DP audio and sound music playing, handsfree call function.

Indicator display:

Pair or establish a connectionthe red and blue lights f alternately

Succefully connected and playingblue LED fes once every 3 seconds

Sleep mode (standby)blue LED fes once every 3 seconds

Charging——The red LED is always on during charging. Fully charged, red light off, blue light on

Charging and connectedthe red LED is always on, and the blue LED fes once every 3 seconds

Bluetooth operating instructions:

1. Long pre the music receiver Push the on for 1 second, and the Bluetooth will enter the ready pairing state. Turn on the Bluetooth function of the phone, and the phone will search for the device name "H-011" of the product.

2. Select "H-011" and connect it. Some mobile phones will ask for the connection paword of "0000".

3. After the connection, the phone will display "H-011" connected, At this time, you can perform various operations (just briefly pre the power on on for 1 second next time, and let go when the blue light is on, and the Bluetooth receiver will automatically connect to the phone. This Bluetooth receiver can only connect to one phone at the same time. When you need to connect to another phone, you need to directly long pre the power off on for 3 seconds to enter the ready pairing state, and then you can search and connect with another phone).

4. Once the pairing is succeful, turn off the power supply of the device, and it will be automatically reconnected at the next boot, without having to manually pair again; For IPHONE mobile phone, cliConnect after the device is turned on again.

5. Play mobile music (A2DP mode).

6. After the connection is completed, play the music in the mobile phone. You can connect all the sounds broadcast in the mobile phone to the car audio device through the audio cable, and play them out from the car audio (such as mobile phone music, Bluetooth calls, and the sounds broadcast by mobile navigation).

Please follow the steps below:

1) Plug the Bluetooth music receiver into the AUX input port of your home stereo or car stereo device;

2) Please confirm that the nsmitter (Bluetooth audio receiver, mobile phone or other related devices) has been turned on and paired with the Bluetooth music receiver, and the device is within 10M;

3) The L. ED light on the Bluetooth audio receiver turns blue and fes slowly, indicating that the connection is succeful.

The connection of the Bluetooth music receiver is based on the completion of pairing. The connection may be interrupted due to the following reasons:

A. The spacing of equipment exceeds 33 feet (10 meters), or there are other obstacles in the middle (such as walls, furniture, etc.);

B. One or both of them have been turned off, which may also be due to power failure;

C. If the connection is not made within the specified time, the device will automatically shut down after timeout when there is no connection within 5 minutes, and then restart the device to reconnect.

Follow these steps:

1. Restart the music receiver and nsmitter;

2. Reconnect and pair after restart;

3. Power up the music receiver and nsmitter again.