Digital Servo Tester ESC Consistency Speed Controler Tester Steering Gear

CCPM Servo Consistency Master / Servo testerThe device also can be used as a signal generator for electric speed controller (ESC), then you can test your motor system without using a transmitter and receiver.There are 3 modes to check servos or ESC:Manual mode: turn the knob with different speed, check the reaction time.Neutral mode: make the servo go back to the neutral point.Automatic "window wiper" mode: make the servo swing like a window wipers in the biggest angle.It can connect 1-3 servos simultaneously and test such as 1-3 servos consistency and so on.You can also connect 1-3 ESC to test and compare their reaction time respectively.It can connect 3 servos of the CCPM helicopters and select servos.It can also connect the servo of airplanes install the steering-box and adjust planes by using such as the neutral mode and so on.Voltage consumption: DC4.8-6VSize: 48 x 42 x 17mmWeight: 31.5 g

Output: 15mA (5.0)Input: DC 4.5 ~ 6VNeutral point output signal: 1.5ms 0.5msSize: 42.5 x 24.0 x 23.5mmWeight: 8gPulse width adjustment mode: automatic / manual adjustment / automatic neutral point signal outputSpecifications:built-in BEC or UBEC3 Pulse width adjustment mode15mA OutputDC 4.5 ~ 6V Input1.5ms0.5ms Neutral point output signaleasily detect the clearance, jitter and median of all kinds of Servo

This CellMeter-8 digital battery capacity checker is able to be used for LiPo LiFe Li-ion NiMH Nicd batteries.Features:Support Battery Type:LiPo, LiFe, Li-ion, NiCd, NiMHServo Test Mode:Manual adjustment, Auto Matic, NeutralServo Test Frequency: 50Hz, 60Hz, 100Hz, 125Hz, 200Hz, 250Hz, 300HzDisplay Mode: Battery cell voltages, Total Voltages, Lowest cell voltage, Highest cell voltage, Voltage gap between highest cell voltage and Lowest cell voltage, Remaining battery capacity(%).Specifications:Item size: 8.5 * 5 * 1.6cmItem Weight: 40gPackage size: 10.5 * 10 * 2cmPackage Weight: 55g

Material: Plastic

Color: Black

Size:7.5 cm x 3.8 cm x 2.5 cm

Weight: 0.88 ounce (30 g)

Input voltage: DC 5~6V

Output signal width: 800~2200u

Can be synchronized output control 4 servos and used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds), you can test the steering gear is able to respond to subtle change

WithM signal test function in the display, the inputM signal changes while the input theM signal synchronization output to the servo

Energized automatically enter manual mode (Manual) 20u

50H analog servo signal cycle, frequency 50Hz, rotary potentiometers to decrease or increase the width of the output pulse

on the Select (Note: the key switch function, circulation patterns)

1. S-1 manual mode (Manual)

2. S-2-bit mode (Neutral)

3. S-3 automatic mode (Automatic)

Keys pulse width - 1. 50H analog servo signal cycle 20us frequency 50Hz

2. 125H digital the steering gear a signal cycle 8us frequency 125Hz

3. 250H Digital Servo signal cycle 4us frequency 250Hz

There are 3 modes to check servos or ESC:Manual mode: turn the knob with different speed, check the reaction time;Neutral mode: make the servo go back to the neutral point;Automatic ''window wiper'' mode: make the servo swing like a window wipers in the biggest angle.It can connect 1-3 servos simultaneously and test such as 1-3 servos consistency and so on.You can also connect 1-3 ESC to test and compare their reaction time respectively.It can connect 3 servos of the CCPM helicopters and select servos.It can also connect the servo of airplanes install the steering-box and adjust planes by using such as the neutral mode and so on.With LED indicators.Specifications:Output: 15mA (5.0)Voltage consumption: DC4.8-6VOutput signal: 1.5ms±0.5msItem Color: BlueSize: 48mm*42mm*17mmNet Weight: 30gPackage Weight: 45g

on the Select (Note: the key switch function, circulation patterns)1. S-1 manual mode (Manual)2. S-2-bit mode (Neutral)3. S-3 automatic mode (Automatic)Keys pulse width:1. 50H analog servo signal cycle 20us frequency 50Hz2. 125H digital the steering gear a signal cycle 8us frequency 125Hz3. 250H Digital Servo signal cycle 4us frequency 250HzSpecifications:Brand: HJMaterial: PlasticColor: Blue + blackInput voltage: DC 5~6VOutput signal width: 800~2200usPackage size: 14 * 10 * 3cm / 5.5 * 3.9 * 1.2inPackage weight: 39g / 1.4oz

Input voltage: DC4.8-6v

Size: 49×34.5×16.5mm

Weight: 15g

It’s with small size and easy to carry.

Four groups of servo connector and it can insert four servos to test at the same time.

The digital tube will real-time display the sizes of pulse width.

Support two test modes: manual operation and s-motion.

Features:

Input Voltage: 4.6-6V

Size: 73.5*43.5*22.5mm

Net Weight: 108g

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.