DR-701D Linear PCM Recorder / Mixer 6-Track Field Recorder audio for DSLR camera Portable Audio System Video Production WTSTR

Designed specifically as an audio recording solution for DSLR video applications, the DR-701D 6-Track Field Recorder from Tascam features dual built-in omnidirectional microphones and four XLR/TRS inputs with phantom power and is capable of recording up to 6 tracks simultaneously. It supports a variety of mounting configurations, featuring a 1/4"-20 thread on the bottom for tripod mounting, as well as a removable camera or cage system attachment bracket with a 1/4"-20 screw.   The DR-701D features an HDMI input that can be connected to your camera's HDMI output, allowing you to start and stop recording remotely via the camera's record button if your camera sends HDMI signal triggering. If your camera sends timecode via HDMI, the DR-701D will follow it and write it to the recorded file. Your NLE software will then read that embedded timecode to lock sound and picture together in post. Additionally, audio being recorded on the DR-701D can be added to the incoming video and timecode from the HDMI In port and sent from the DR-701D's HDMI Out to an HDMI monitor recorder. The recorder can also lock to SMPTE timecode coming into its BNC connector.    The DR-701D features a rugged build quality yet weighs less than a pound and a half including the 4 AA batteries that power it. Battery life depends on usage, but with 4 lithium batteries, internal clock, and phantom power on two inputs, the unit is designed to record for over 5 hours at 16-bit/48kHz. The unit can also be powered using the optional PS-P515U AC adapter. Audio is recorded to SD, SDHC, or SDXC cards up to 128 GB and can be recorded at resolutions of up to 24-bit, 192kHz. In addition to the four XLR/TRS inputs, a 3.5mm stereo mini-jack input with optional plug-in power is provided for connecting an external stereo mic.    The recorder also features a camera out mini-jack that allows you to record the output of the DR-701D to your camera to use as a sync reference, and a camera-in mini-jack allows you to playback the camera's audio and monitor from the 3.5mm line out or 3.5mm headphone out jacks.   Features:   *6 maximum simultaneous recording tracks *SD/SDHC/SDXC cards used for recording media *MONO, STEREO, 2MIX, DUAL MONO, DUAL ST and DUAL2MIX recording modes *Recording formats: 16/24-bit, 44.1/48/96/192kHz (WAV/BWF) (192kHz only for two-track recording) *Built-in TASCAM HDDA mic preamps provide high audio quality *Input levels can be adjusted separately for each track *XLR/TRS inputs support +4dBu line level and 24/48V phantom power *Clock and record start/stop can be synchronized with a camera using the HDMI port *DR-701D audio signal can be output to an external camera or recorder from the HDMI OUT or line output *Cascade function using HDMI connections allows multiple DR-701D transport and monitoring operations *SMPTE Timecode can be input through the TC IN connector to add recording start times to files *Timecode generator (RTC) allows recording start times to be added to files even when there is no timecode input *Plug-in power mics and high output mics (EXT IN 1/2) supported *CAMERA OUT connector can output audio mixed by the DR-701D to a DSLR camera *CAMERA IN connector enables monitoring the sound from a DSLR camera through the DR-701D *High quality audio output through a line output jack separate from the headphones jack *Headphones jack with 50mW+50mW maximum output *Tripod attachment threads (bottom), camera screw attachment that can be installed or removed with a coin (top) and shoe mount (top) included *Handles on the left and right sides of the front protect the control surface and also enable attachment of a shoulder strap *Transport and SLATE buttons made of rubber suppress noise during operation *HOLD switch prevents inadvertent control adjustments 128×64-dot graphic LCD with backlight *LED lights have high visibility even in direct sunlight *High-speed transfer of files to computers possible using USB 2.0 *Micro-B type USB cable included *Powered by 4 AA batteries, USB bus power or a PS-P515U AC adapter (sold separately) *BP-6AA external battery pack (sold separately) enables operation for even longer times *Optional RC-3F foot switch and RC-10 wireless remote control can be connected (both sold separately) *Built-in mixer enables pan and level adjustments as well as solo monitoring and can output a mix of 4 channels *GANG function allows the levels of multiple channels to be controlled simultaneously *Individual channel trim settings shown *5-position low-cut filter (50/80/120/180/220 Hz) cuts unwanted low frequencies *Multi-band limiter automatically adjusts input overloads (stereo-linking possible with 1/L and 2/R) *Delay function can compensate for distances between mics (+/-150 ms) *Mid-side decoder function enables use with mid-side stereo mics *Slate tone insertion functions (AUTO/MANUAL) *Slate tone insertion points can be selected (recording start or recording start and stop when slate AUTO function used)   Specificatio