H61 X79 BTC Miner Motherboard with E5 2620 V2 CPU+24Pins Power Connector Support 3060 3070 3080 GPU for BTC Miner Mining

Brand new X79 BTC 5 card slot mining board with E5 2620 V2 2011Pin CPU+24PIN Power Connector
If you want to use other CPUs, please use CPUs below 2630, such as 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2; The BTC X79 motherboard uses the H61 chip and a single-channel 2011 socket CPU;
Design 5 Pcie3.0X8 graphics interface
The computing power of a single card is up to 48MH/s or more, and it perfectly supports 4G video memory graphics cards, which greatly improves the mining function of computing power.
In-line 5 card X79 (H61 chip) motherboard, support 3060 3070 3080 3080 TI graphics card! 60mm large-spacing graphics slot.

Supported CPU platform: for Intel XEON
Chipset: for Intel H61
Supported CPU type: E5-26XX (supports 26 series CPUs below 2630)
Supported CPU socket: 2011
Network card chip: 1*REALIEK 8105E 100M network card
Memory type: DDR3 supports desktop and server memory
Support Maximum memory capacity: 32G
Working environment: 0-95% relative humidity, non-condensing, -20°c-60°c
Memory description: Support 1066/1333/1600/1866MHz frequency
Detailed interface:
1. CPU socket: 1*LGA(2011)
2. USB port: 4*USB 2.0
3. USB pin: 1*USB 2.0
4. Hard disk interface: 1*SATA 3.0
5. Hard disk interface: 1*MSATA
6. Network card interface: 1*LAN
7. Memory slot: 1*DDR3
8. Chipset: BGA (H61)
9. BIOS initial restore: JCMOS
10. Graphics interface: 5*PCI Express 3.0 8X, pitch 60mm
11. Motherboard/graphics card power supply: 6*POWER_PE
12. Self-initiated call: AUTO_ON
Notice: Different batches of products are slightly different, and the colors of the slots and the bottom plate are random, the specified color is not accepted, thank you.
Material:PCB
colour:black

Package Contents:
1 * Motherboard
1 * 24P short connector
1 * E5 2620 V2 CPU (installed in the motherboard)

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.