Homebrew CO2 Cylinder Refill Adapter Connector Gas Regulator DIN

Name: CO2 Refill Adapters for European SodaStream Cylinders for Gas Regulator Homebrew

Specifications:
Material: Copper
: Silver
Inner Thread: 21*4
Outer Thread: W21.8
Height: 54mm/2.12''(appr.)
Diameter: 27.5mm/1.08''(appr.)

Features
and high quality.
- Integrated for safety.
- Use your existing CO2 regulator without any modification.
- Adjustable valve pin ensures compatibility with any cylinder valve variation.
- Advanced adapter design means no more leaks while attaching the adapter to the cylinder.
- The male/output thread on the adapter is made to DIN477 / JIS m22-14 / W21.8-14 / .860"x1/14 (covers UK, Europe and Asia) specifications, which will fit industry standard regulators.

Instructions
1. Attach your regulator to the adapter using an appropriate wrench or spanner.
2. Holding the cylinder firmly with one hand, tighten the adapter/regulator to the cylinder using a wrench or spanner.
3. The pin inside the adapter will depress the valve on the cylinder to open the flow of gas.
4. Continue to tighten the adapter to the cylinder until the cylinder slips in your hand.


Notice:
Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
Please understand that colors may exist chromatic aberration as the different placement of pictures.














a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a