HW-300S Auto Digital Thickness Gauge Car Paint Thickness Meter Coating Thickness

 

 

 

 

 

 

 

 
 

This product is mainly used to measure the thickness of non-conductive coating on metal surface, as well as the thickness of non-ferromagnetic coating on ferromagnetic metal (such as iron, nickel, cobalt, etc.), such as paint thickness on automobile surface, coating thickness of metal parts and so on. This product also has built-in magnetic induction and vortex double principle probe, can

 

automatically identify the measured metal substrate, only need to be placed on the measured surface, can automatically calculate the thickness of the coating.

 





 
 

Specifications:

 

Probe: F probe, N probe

 

Magnetic induction: Measuring principle(F), Eddy current effect(N)

 

Measuring range: 0-2000um

 

Precision: ±(3%+1um)

 

Resolution: 0um-99.9um(0.1um) 100um-999um(1um) >1000um(0.01mm)

 

Zero calibration: Support

 

Statistics: Average, minimum, maximum, number

 

Unit: um,mm,mils

 

Minimum convex Radian: 5mm

 

Minimum concave Radian: 25mm

 

Minimum measured area: Diameter 20mm

 

Minimum substrate thickness: 0.2mm 0.05mm

 

Maximum measuring speed: 2 readings per second

 

Power supply: 2*1.5V AAA battery(not included)

 

Operating environment: Temperature 0-50°C, 20-90% rh (non-condensed)

 

Preservation environment: Temperature:-10-60°C, 20-90% rh (non-condensation)

 

Size /weight/material: 113mmX53mmX24mm/80g/ABS

 





 
 

Measurement step:

 

Step 1. Prepare the parts to be tested.

 

Step 2. Stay away from the metal object at least 2 cm, press the switch key to turn on.

 

Note: it is suggested that the instrument should be zeroed with reference to "zero calibration" before

 

testing.

 

Step 3. The probe is placed vertically and quickly on the surface to be measured until the drop is heard,

 

and the measured value is displayed on the screen, and then the probe is lifted at least 2 cm away from

 

the part to be measured, and the next measurement can be carried out.

 

Note: if the automatic shutdown function is turned on and there is no operation within 3 minutes, the

 

instrument will automatically shut down

 





 
 

This machine has two calibration methods:

 

1. Basic calibration: the base calibration should be carried out when it is used for the first time, or has

 

not been used for a long time, or when replacing the tested substrate material. There are 7 calibration

 

points in the basic calibration, and the calibration unit is mm..

 

a. Prepare 6 pieces of standard film, the thickness of which is in0. 04 ~ 0.06,0.09 ~ 0. 11, 0.22 ~ 0.28,

 

0. 45 ~ 0.55,1. 90 ~ 1.05,1.90 ~ 2.00.

 

b. First hold down the up key to hold, then press the on key, LCD full screen kettle display, and then

 

hear a BI, LCD display Display 00mm, the lower right corner of the LCD displays the CAL character,ʺRelease

 

the up buttonʺ indicating that the calibration screen is entered.

 

c. Press the probe lightly on the uncoated aluminum base, at which point the LCD displays 0.00, and

 

then BI-BI calibrates twice.

 

d. Get rid of the probe and show the number of 0.05mm on the LCD. The second number calibration is

 

carried out, and the probe is gently pressed on the aluminum base where the calibration sheet is placed.

 

After adjusting the value displayed on the LCD and the thickness of the calibration sheet by pressing the

 

upper and lower keys, remove the probe and Bi-Bi-Sound, the second calibration point has been calibrated.

 





 
 

Zero calibration:

 

In order to improve the test accuracy, it is suggested that the instrument should be calibrated to zero.

 

a. Preparation of uncoated substrate to be tested

 

b. Hold down the right hand until you hear the drop, and the "zero calibration (ZERO)" on the screen

 

will begin to flicker.

 

c. The probe is placed vertically and quickly on the surface of the uncoated substrate to be tested.

 

After hearing the dripping sound, the screen will display "0", and the probe can be lifted at least 2 cm

 

away from the substrate, that is, to return to zero once.