MX3 Flying Squirrel Intelligent Voice Remote Control Usb2.4g Mouse and Keyboard Integrated Infrared Learning

 

MX3 USB 2.4G Flymouse

 

 

 

Because the Air Mouse Has Built-in Gyroscope, It Can Sense the Change of Direction and Speed. as Long as You Wave the Mouse in the Air, You Can Control the Cursor Movement of Electronic Products Such as Computers and Android Players, there Is No Need for Traditional Keyboard and Mouse, Which Frees Hands and Increases the Fun of Using! With It, You Can Also Control Computer Equipment, Play Motion Sensing Game, Surf the Internet, Chat with Friends While Sitting on the Sofa...... In Short, It Is a New High-Tech Electronic Product in Recent Years and a Good Partner for Home Computer Products!

 

This Is a Built-inGyroscopeandGravity Acceleration SensorWireless Air Mouse. It Can Realize the Functions of Traditional Remote Control, Mouse and Motion Sensing Game under Andriod.

 

It Can Free You from Entertainment Equipment Such as Computer/TV/Projection. You Only Need to Turn Your Wrist and Move Your Wrist to Quickly Convert It into a Moving Cursor on the Screen.

 

 Product Introduction

1. 1.1.6 Axis (3 Axis Gyro 3 Axis Accelerometer) Empty Mouse.
2. 2.2.16 KHz Microphone and Voice Input (Optional).
3. 3.3. Gamepad
4. 4.4.1: 1 Somatosensory Capture
5. 5.5.1: 1 User Experience
6. 6.6. Full Keyboard Input
7. 7.7. Infrared and Wireless Transmission
8. 8.8. Infrared Learning Function 

 

Parameter

   USBReceiverTransmission rate1MbpsOperating frequency2400.0MHz  –  2483.5MHzOutput power-18dBm  -  0dBmFunctionHID Compatible Devices, USB Audio Microphone Devices  ControllerTransmission rate1MbpsOperating frequency2400.0MHz  –  2483.5MHzOutput power-18dBm  -  0dBmFunction6-Axis Empty Mouse, Gamepad, Full Keyboard Input

 

◎ASurface Function Operation Instructions

1. RFand Infrared Function Switching

By Default, MX3 Works in RF Wireless Mode and LED Lights Are off. Press Any Button at This Time, the LED Light Will Flash Once.

In the Wireless Working Mode, When "" Is Pressed for about One Second, MX3 Will Switch to the Infrared Working Mode. at This Time, the LED Light Is on, and the LED Flashes Once by Pressing Any Key. In the Infrared Working Mode, You Can Enter the Infrared Learning Function.

In the Infrared Working Mode, Press "" for about One Second, MX3 Will Switch to RF Working Mode, and the LED Light Will Turn off at This Time

 

◎BSurface Wireless Code Value

1. by Default, All Button on the B Side Only Send Wireless Code Values. For More Information about Code Values, See HID Device Usage Code Table.

2. Press Once to Lock the Uppercase Function, Press Again to Cancel the Uppercase Function, and Enter Lowercase.

3. Press Once ", Enter Numbers and Special Characters to Lock the Function, Press Again", Enter Numbers and Special Characters to Cancel the Function.

 

Function Operation Description

 

1.  USBReceiver

MX3 USB Receiver Is Defined as a Standard HID Device, Plug and Play, Receiving Transmitter Signals and Data, and Supporting Windows, Android and IOS Systems.1.  2.      Pairing

2.1 Press and Hold the "TV" Key and "OK" Key on the Side at the Same Time, and the LED Will Flash Quickly to Enter the Wireless Pairing Mode.

2.2 Insert the USB Receiver to Power on and Wait for about 3 Seconds. If the MX3 A- Side Led Stops Flashing, the Pairing Is Successful.

3.Speed Adjustment of Empty Mouse Cursor Pointer

3.1 Speed of Cursor Pointer: Press "OK" and "Vol" at the Same Time, and the LED Light Flashes Rapidly for about 1 Second, Indicating That the Speed of Cursor Pointer Increases by One Level;

3.2 The Cursor Pointer Slow down: Press "OK" and "Vol-" at the Same Time, LED Light Flash for about 1 Second, Indicating the Speed of the Cursor Is Slow down One Level;

 Label:There Are about 12 Speed Adjustments in Total. When the Pointer Speed Is Already in 12 Speed, It Can Only Be Adjusted Slowly Or Quickly.

4.Empty Mouse Calibration

 4.1 Press and Hold the OK Button to Power up, and Then Put It on the Desktop Or a Plane;

4.2 until the LED Changes from Flashing to Fast Flashing, the Static Calibration Is Completed.

Label:When the Cursor Drifts, Static Calibration Compensation Is Required.

5, Infrared Learning Operation Instructions

Label:Make SureMX3Working in Infrared Mode, at This TimeLEDThe Light Is Always on

1) Enter the Infrared Learning Mode: Press and Hold the "TV" Button for 2~3 Seconds, MX3 Will Enter the Infrared Learning Mode, and the LED Lights Will Flash Slowly Every 1 Second.

2) Infrared Learning Mode, a TV Remote Control Infrared Head Aligned with the MX3 Infrared Head, Press the TV Remote Control Infrared Any Button, MX3 Led Fast Flash Indicates That the Code Value Sent by the TV Remote Control, the Flash Interval Is 200 to 300 Milliseconds.

3) Next, Press the Button Corresponding to MX3. This Button Will Learn the Code Value of TV Remote Control. at This Time, the LED Will Flash Slowly, Waiting for Another Code Value of Button to Be Learned.

4) Then, Repeat the Operation 2nd) and 3rd) Steps to Complete the Learning of Other Button Code Values.

5) Press the "TV" Button for about One Second to Complete the Infrared Learning, Return to the Infrared Working Mode, and the LED Light Will Always Be on.

Note: in the Infrared Working Mode, Press and Hold the TV Button for about One Second, and Remote Control Will Switch to the RF Working Mode. at This Time, the LED Is off.

6.Voice

After the Battery Is Installed, the Voice Is Turned off by Default. Short Press Can Turn on The Voice, and Then Short Press to Turn off the Voice

◎MX3Power Consumption Description

1, General Mode

Enable Voice and Somatosensory Control, and the Power Consumption Is Less than 50MW.

2, Standby Mode

30 Seconds without MX3,MX3 Will Enter Standby Mode, the Power Consumption Is Less than 25MW.

At This Time, the Customer Presses Any Key to Wake up MX3.

3Sleep Mode

60 Seconds without MX3,MX3 Will Enter Deep Sleep Mode, at This Time the Power Consumption Is Less than 0.1MW.

 

 

Packing InformationProduct Size:17.2*5.2*1.9CMUnit Case Size:21.5X6.6X2.8CMCTN Size (Carton Size):38*31.5*43cmQty/CTN:(Quantity Per Box):100pcsN.W:89gG.W:0.012 kg/pc, 12.5kg/CTN

 

 

MX3 Standard Edition:

MX3 Voice Version:

 

MX3 Backlit White Backlight:

 

 

MX3 Backlight with Voice:

 

 

 

 

There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. If you do not understand what you can contact customer service at any time, I wish you a happy shopping.