This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
In stock
Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Door Delivery
Return Policy
Easy Return, Quick Refund.Details
Seller Information
haotianqi
40%Seller Score
1 Followers
Seller Performance
Order Fulfillment Rate: Very Poor
Quality Score: Poor
Customer Rating: Good
Product details
[Overview]
PiKVM (https://pikvm.org/) is a very powerful and Open Source Software which allows for a remote connection via your Raspberry Pi to turn on/off or restart your computer, configure the UEFI/BIOS, and even reinstall the OS using the Virtual CD-ROM or Flash Drive. You can use your remote keyboard and mouse or PiKVM can simulate a keyboard, mouse, and a monitor, which are then presented in a web browser as if you were working on a remote system directly. It's true hardware-level acce with no dependency on any remote ports, protocols or services!
The KVM refers to Keyboard Video Mouse.
This PiKVM-A4 kit is designed and based on Raspberry Pi Zero 2 W . So far there is no case for them.
The whole PiKVM-A4 kit is composed of follow parts:
X630 HDMI to CSI-2 Module (for video capture)
X630-A4 Expansion Board (for ethernet, RTC, power in etc)
X630-A5 Adapter Board (it is installed inside the PC case, and it connect the computer motherboard and IO panel cabe of PC case)
0.96 inch OLED (for display, Resolution: 128×64 pixel)
Ethernet Cable ( TIA/EIA-568.B connection, and it's ATX control signal cable )
Note:
Please use the supplied USB Type-C to USB 2.0 A-Male Cable only. USB-C to USB-A cable only with DATA lines (for keyboard and mouse emulation), using other cable might cause instability or damage to either the host PC or the Pi.
DON'T use raspberry pi's OTG port as it is occupied, please use OTG port on X630-A4 .
[How to Power PiKVM]
Power Input: 5.1Vdc +/-5% , ≥3A (Power Via USB Type-C port of X630-A4 ), Recommend Geekworm 5V 4A 20W USB-C PSU
[User Manual]Official Document: https://pikvm.org/
Hardware Introduction: https://wiki.geekworm.com/PiKVM
[Wiring Diagram]
The X630-A5 adapter board will be install into the PC Case.
The wire group ① connect to X630-A5 comes from the PANEL of PC Case.
The black and red wires(wire group ②) come from X630-A5 acceories.
[Features]
Designed especially for PiKVM ( Raspberry Pi based KVM over IP)
Fully compatiblie with PiKVM OS
Control a server and computer using a web browser
HDMI Full HD capture based on the TC358743
OTG Keyboar; mouse; Ma Storage Drive emulation
Hardware Real Time Clock (RTC) with CR1220 coin battery socket
Equipped with solidstate relays to protect RPi GPIO pins from computer and ESD ke
ATX control via RJ45 connector Switch the machine on or off, reset it, and monitor the status of HDD LE; power LED remotely
Reserves the 4pin header & spacers for I2C OLED display
[Packing List]
Kit-A (compatible with raspberry pi zero 2 w):1 x X630 HDMI to CSI-2 Module
1 x FPC Cable (8cm length)
1 x X630-A4 Expansion Board
1 x USB-A to USB-C OTG Cable (Cable Length: 100cm / 39.37 inch)
8 x M2.5*3 Screw
3 x M2.5*4+4 Spacer
1 x M2.5*10+4 Spacer
1 x M2.5*15+4 Spacer
2 x M2.5*15 Spacer
1 x X630-A5 Adapter Board
1 x Screw
1 x Cable (Cable Length: 47cm / 18.50 inch)
1 x 0.96 inch OLED
2 x M2*6 Screw
1 x Ethernet Cable
Kit-B (This kit is for user who already had X630):1 x X630-A4 Expansion Board
1 x USB-A to USB-C OTG Cable (Cable Length: 100cm / 39.37 inch)
8 x M2.5*3 Screw
3 x M2.5*4+4 Spacer
1 x M2.5*10+4 Spacer
1 x M2.5*15+4 Spacer
2 x M2.5*15 Spacer
1 x X630-A5 Adapter Board
1 x Screw
1 x Cable (Cable Length: 47cm / 18.50 inch)
1 x 0.96 inch OLED
2 x M2*6 Screw
1 x Ethernet Cable
About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer).
Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .
Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.
Specifications
Key Features
- Compatible With:Raspberry Pi Zero 2 W
- Accessory Type:Extension Board
- Origin:Mainland China
What’s in the box
Specifications
- SKU: GE840EA3P0Q80NAFAMZ
- Model: MOMyanshibanpeijian2360
- Production Country: China
- Size (L x W x H cm): 10x8x6
- Weight (kg): 0.3
- Main Material: PVC
Customer Feedback
This product has no ratings yet.