PM989 PGA988 industrial computer CPU LED cooling sheet TEC copper heat sink

A

Aavid fan (dual ball bearing)

Voltage Current: 12V -- 0.14A

Maximum speed: 4700 RPM±10%

Maximum Air Volume: 11.93 CFM

Maximum wind preure: 2.83 mm-H2O

Fan header: 3 pin

Blawire: negative electrode;

Red wire: positive;

Yellow line: FG

B

5015 Turbofan (Dual Ball Bearing)

Voltage Current: 12V -- 0.35A

Maximum speed: 6500 RPM ± 5%

Maximum Air Volume: 5.16 CFM

Maximum wind preure: 24.8 mm-H2O

Fan header: 4 pins,

Blawire: negative electrode;

Red wire: positive;

Yellow line: FG;

Blue wire: PWM

C

Aavid fan (dual ball bearing)

Voltage Current: 12V -- 0.14A

Maximum speed: 4700 RPM±10%

Maximum Air Volume: 11.93 CFM

Maximum wind preure: 2.83 mm-H2O

Fan header: 3 pin

Blawire: negative electrode;

Red wire: positive;

Yellow line: FG

D

Aavid fan (dual ball bearing)

Voltage Current: 12V -- 0.14A

Maximum speed: 4700 RPM±10%

Maximum Air Volume: 11.93 CFM

Maximum wind preure: 2.83 mm-H2O

Fan header: 3 pin

Blawire: negative electrode;

Red wire: positive;

Yellow line: FG

E

5015 Turbofan (Dual Ball Bearing)

Voltage Current: 12V -- 0.35A

Maximum speed: 6500 RPM ± 5%

Maximum Air Volume: 5.16 CFM

Maximum wind preure: 24.8 mm-H2O

Fan header: 4 pins,

Blawire: negative electrode;

Red wire: positive;

Yellow line: FG;

Blue wire: PWM

Ts:

1. It is recommended that the installation should cooperate with the chais air duct as much as poible to achieve the highest efficiency (according to the actual situation);

※ 2 ※. When installing the , the 4 screws should be tightened evenly in diagonal order; (e sure the is in full contact with the surface of the CPU.)

3. When purchasing a , please confirm that the size of the matches the installation of the , and other components of the should be avoided;

4. This is d for servers, network , industrial control computers, and industrial . Some products are equped with high-speed industrial fans, which have high noise. rs who have high requirements for quietne should choose carefully;

5. Due to static electricity, the will absorb dust, please clean the dust on the and fan on time; (guarantee the heat diation efficiency.)

6. The weight of the is ≥500g. It is recommended not to install it on the CPU during nsportation to avoid damage to the CPU;

※ 7 ※. This belongs to the air-cooled heat diation scheme, and the strength of the fan is very ant for the heat diation effect. If it is a paive heat sink (the heat sink is designed without a fan), it needs to be supported by a corresponding strength fan to aist heat diation in actual application. .