Premium 3D Printer Part Wireless Router WiFi Module For MKS

Description :

- Material : Alloy ; Application : 3D Printer
- Size : 150x100x40mm / 5 . 90x3 . 94x1 . 57inch
- Suitable for MKS TFT28 and all MKS series motherboards .
- First , connect the WIFI module to the AUX - 1 interface . Second , look for WIFI hotspots and connection .
- Look for the hotspot as HI - LINK - XXXX and connect to it . The password is 12345678 . If the hotspot is not found , press and hold the button on the module for 10 seconds to restore the factory settings .

Specification :

1 . After joining the hotspot HI - LINK - XXXX . Connection URL : http :// 192 . 168 . 16 . 254 to enter the configuration page .
2 . The login account is admin Password : admin
3 . Configure the network as required , and modify it to Client mode as needed .
Use Printrun remote control printer :
Note that the IP address of the WIFI input at the port is 192 . 168 . 16 . 254 : 8080 .
Use Repetier - Host remote control printer :
Note that the connection terminal selects a TCP / IP connection .

Package Includes :

1 Piece WIFI Module

1 Piece Connection Cable

Note :

Due to insufficient current , it cannot be used in the Ramps 1 . 4 kit and the MKS Ramp 1 . 4 kit .

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a