Red JCD 8858 Hot Air Gun Micro Rework Station LED Dial Hair Dryer for 700W Heat Gun Welding Repair Tools

JCD Hot Air Gun Micro Rework Station 8858 LED Dial Hair Dryer for 700W Heat Gun Welding Repair Tools

【specification】8858 Hot Air Gun

Voltage: AC220-240V / AC100-130V

Frequency: 50Hz / 60Hz

Output power: 750W

Temperature range: 100 ° C to 480 ° C

Temperature stability: ± 2 ° C

Air flow: 150 liters per minute (maximum)

【Product Description】

1. Portable dial LED display

2. Adjust the keyboard to control the air flow and temperature

3. For nozzle repment, refer to the instructions for the three types of nozzles (large, medium, and small) that come with the product.

4. If the temperature is below 70 ℃, the rotation can be stopped automatically.

5. High quality strength and long service life

6. Safe welding of QFP, C, and other temperature sensitive components

7. Intelligent guidance and cold air flow function

8. The green line, high quality silicon body and excellent heat diipation extend the service life and save energy.

9. Portable and dial LED reworkstation with brushle fan, 100W ~ 650W technical data.

Hot air gun

1)Turn on the power and adjust the temperature knob. If the temperature does not reach a predetermined value, the indicator light will turn on. Wait for a while, when the temperature reaches a certain value, the indicator light goes off.

2) Adjust the temperature and air flow of the hot air gun according to the shape and working conditions of the nozzle.3) Do not put too much force when attaching nozzle. In addition, to prevent damage to the electric wire or high temperature gla, please do not strongly strike the work table with welding iron.4) Please be careful of high temperature operation. Please do not use the hot air gun near the or the object. Pay attention to personal safety. Rep or leave the component. Don't forget to turn the power off and cooling. If you do not use this product for a long time, please remove the power plug.:1) Turn on the power and adjust the temperature knob. If the temperature does not reach a predetermined value, the indicator light will turn on. Wait for a while, when the temperature reaches a certain value, the indicator light goes off.2) In the welding proce, the temperature of the station can be adjusted. When the solder is hard to diolve, the temperature can be raised appropriately.3) Rosin is flux and can improve welding quality and efficiency.4) In the welding proce, first, the pen is coated with tin, and the point is heated using the pen, and the welding wire is pd at the point.5) When the welding is complete, the tin is coated on the pen for protection.