S3213 Outboard Marine Marine Fuel Oil Water Separation Ship Filter Fuel Water Separator Filter

To Drain Water
1. Loosen self-venting drain plug to drain water from bowl into a container.
2. Tighten drain.
3. Use primer bulb to fill filter with fuel.
4. Start engine and check ensure there are no leaks.
Model: S3213 SFC-19120-10B 35604941 35809097
Size: 12*12*25cm
To Replace Element
1. Loosen self-venting drain plug and drain the elementsinto a container.
2. Remove filter elementsfrom mounting bracket with bowl connected.
3. Remove bowl from filter elementsand clean o-ring gland on bowl. BOWL IS REUSABLE * DO NOT DISCARD.
4. Lubricate o-ring with oil or grease and install on bowl.
5. Install bowl onto new element, tighten by hand.
6. Lubricate filter top seal with oil or grease.
7. Fill filter/bowl assemble with clean fuel and attach onto mounting bracket, tighten by hand.
8. Start engine and check to ensure there are no leaks.
Colour:Photo Color
Material:Plastic + metal
Package Contents:
1* Fuel Water Separator
4* brass head
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.