Share this product

STEPPER MOTOR 5VDC UNIPOLAR

KSh 350

1 units left

+ shipping from KSh 69 to CBD - UON/Globe/Koja/River Road

0 out of 5

Delivery Fees KSh 69

Ready for pickup between 30 April & 01 May when you order within next 1hrs 42mins

Delivery Fees KSh 179

Ready for delivery between 30 April & 01 May when you order within next 1hrs 42mins

Easy Return, Quick Refund.Details

Clink Technology

94%Seller Score

5 Followers

Order Fulfillment Rate: Excellent

Quality Score: Excellent

Customer Rating: Good

This is a great first stepper motor, good for small projects and experimenting with steppers, This uni-polar motor has a built in mounting plate with two mounting holes, There are only 32 step (11.25 degree) per revolution, and inside is a 1/16 reduction gear set, (Actually its 1/16.032 but for most purposes 1/16 is a good enough approximation) What this means is that there are really 32*16.032 steps per revolution = 513 steps The shaft is flattened so its easy to attach stuff to it with a set-screw. A perfect first stepper motor and works well with the Motor Shield for Arduino. The gearing has a few side effects which are important to note. First, you can turn the stepper by hand but not as smoothly as an un-geared stepper. It also means you shouldn’t use interleaved or micro-stepping to control or it will take forever to turn.
Instead use single or double stepping.
The torque is fairly high but its slower than un-geared steppers – we maxed out at about 80 RPM when powering with 12VDC and about 50 RPM on 9VDC.

Unipolar stepper with 0.1″ spaced 5-pin cable connector
32 steps per revolution
1/16.025 geared down reduction
5V-12V DC suggested operation
Weight: 37 g.
Dimensions: 28mm diameter, 20mm tall not including 9mm shaft with 5mm diameter
9″ / 23 cm long cable
Holding Torque @ 12VDC: 250 gram-force*cm, 25 N*mm/ 3.5 oz-force*in
Shaft: 5mm diameter flattened

1 servo motor1 motor controller

This product has no ratings yet.

KSh 350

Questions about this product?